232-103-H7Z108_09 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Jam Nut Mount Hermetic Bulkhead Feed-Thru

232-103-H7
Jam Nut Mount Hermetic Bulkhead Feed-Thru
MIL-DTL-38999 Series II Type
Connector Series
Shell Size
08
10
12
Insert Arrangement
Per MIL-DTL-38999 Series II
MIL-STD-1560
232 - D38999 Series II Type
14
B
16
18
Shell Style
20
H7 - Jam Nut Mount
22
24
Alternate Key
C
Position
A, B, C, D
(N = Normal)
232 - 103 - H7 Z1 10 - 35 P N - 01
Connector Type
103 - Hermetic Bulkhead
Feed-Thru
Connector Material and Finish
FT - Carbon Steel, Fused Tin
Z1 - CRES, Passivated
ZL - CRES, Nickel Finish
Contact Termination
P - Pin on Jam Nut Side
S - Socket on Jam Nut Side
Panel Accomodation
01 - .0625″ (Min) .900″ (Max)
02 - .0625″ (Min) 1.050″ (Max)
03 - .0625″ (Min) 1.300″ (Max)
D
32 25 17
40
10
47
4
53
1
55
3
52
9
46
39
31
16
24
D
ØB
TABLE I: CONNECTOR DIMENSIONS
SHELL
SIZE
A THREAD
CLASS 2A
B DIA
MAX
C
HEX
D
FLATS
E DIA F +.000-.005
±.005(0.1)
(0-0.1)
08
.875-20 UNEF .474(12.0) 1.062(27.0) 1.250(31.8) .885(22.5) .830(21.1)
10 1.000-20 UNEF .591(15.0) 1.188(30.2) 1.375(34.9) 1.010(25.7) .955(24.3)
12 1.125-18 UNEF .751(19.1) 1.312(33.3) 1.500(38.1) 1.135(28.8) 1.085(27.6)
14 1.250-18 UNEF .876(22.3) 1.438(36.5) 1.625(41.3) 1.260(32.0) 1.210(30.7)
16 1.375-18 UNEF 1.001(25.4) 1.562(39.7) 1.781(45.2) 1.385(35.2) 1.335(33.9)
18 1.500-18 UNEF 1.126(28.6) 1.688(42.9) 1.890(48.0) 1.510(38.4) 1.460(37.1)
20 1.625-18 UNEF 1.251(31.8) 1.812(46.0) 2.016(51.2) 1.635(41.5) 1.585(40.3)
22 1.750-18 UNS 1.376(35.0) 2.000(50.8) 2.140(54.4) 1.760(44.7) 1.710(43.4)
24 1.875-16 UN 1.501(38.1) 2.125(54.0) 2.265(57.5) 1.885(47.9) 1.835(46.6)
A Thread
.322
.312
.105
.094
E Dia
F
Recommended Panel Cut-Out
APPLICATION NOTES
1. Power to a given contact on one end will result in power to contact directly
opposite, regardless of identification letter.
2. Hermeticity = less than 1 x 10^-7 cc/sec at one atmosphere. Not for use in liquid
atmosphere.
Contacts – Gold Plated. Pin: alloy 52; Skt.: copper alloy
Insulator – fused vitreous glass/N.A.
Seals – fluorosilicone rubber/N.A.
4. Metric dimensions (mm) are indicated in parentheses.
3. Material/finish:
Shell, nut – CRES/passivated, carbon steel/fused tin or CRES/nickel per QQ-N-290.
© 2009 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-28
E-Mail: [e-mail]