232-100-H7 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Jam Nut Mount Hermetic Receptacle

232-100-H7
Jam Nut Mount Hermetic Receptacle
MIL-DTL-38999 Series II Type
How To Order: Commercial
Contact Termination
Connector Series
Shell Style
Shell Size
P - Pin, Solder Cup S - Socket, Solder Cup
X - Pin, Eyelet
Z - Socket, Eyelet
B
232 - Series II Type
H7 - Hermetic Box Mount
08,10,12,14,16,18,20,22,24
C - Pin, PCB
D - Socket, PCB
232 - 100 - H7 Z1 10 - 35 P N
Connector Type
100 - Hermetic
Receptacle
Connector Material / Finish
ZL - CRES, Nickel
Z1 - CRES, Passivated
FT - Carbon Steel, Fused Tin
Insert Arrangement
Per MIL-STD-1560;
See Pages B-2 - B-4
Alternate Key Position
A, B, C, D,
(N = Normal)
WIRE ACCOMODATION
Contact Size
22D
20
16
12
Wire Guage
#22 - #28
#20 - #24
#16 - #20
#12 - #14
HERMETIC LEAK RATE MOD CODES
Designator
Required Leak Rate
–585A
1 x 10^-10 cc Helium per second
–585B
1 x 10^-9 cc Helium per second
–585C
1 x 10^-8 cc Helium per second
SHELL
SIZE
8/08
10
12
14
16
18
20
22
24
TABLE I: CONNECTOR DIMENSIONS
A THREAD
CLASS 2A
B DIA
±.016(0.4)
C FLAT
±.004(0.1)
D A/F
±.016(0.4)
.875-20 UNEF 1.375(34.9) .815(20.7) 1.25(31.8)
1.000-20 UNEF 1.5(38.1) .939(23.9) 1.375(34.9)
1.125-18 UNEF 1.625(41.3) 1.063(27.0) 1.5(38.1)
1.250-18 UNEF 1.75(44.5) 1.188(30.2) 1.625(41.3)
1.375-18 UNEF 1.938(49.2) 1.318(33.5) 1.781(45.2)
1.500-18 UNEF 2.016(51.2) 1.438(36.5) 1.890(48.0)
1.625-18 UNEF 2.141(54.4) 1.563(39.7) 2.016(51.2)
1.750-18 UNS 2.265(57.5) 1.688(42.9) 2.140(54.4)
1.875-16 UN
2.39(60.7) 1.813(46.1) 2.265(57.5)
SHELL
SIZE
8/08
10
12
14
16
18
20
22
24
TABLE I (CONTINUED): CONNECTOR DIMENSIONS
EP
MAX
ES
MAX
F
±.005(0.1)
G DIA
±.005(0.1)
H
±.005(0.1)
L MAX
.281 (7.1) .359 (9.1) .438(11.1) .885(22.48) .830(21.08) .724(18.4)
.281 (7.1) .359 (9.1) .438(11.1) 1.010(25.65) .955(24.26) .724(18.4)
.281 (7.1) .359 (9.1) .438(11.1) 1.135(28.83) 1.085(27.56) .724(18.4)
.281 (7.1) .359 (9.1) .438(11.1) 1.260(32.01) 1.210(30.73) .724(18.4)
.281 (7.1) .359 (9.1) .438(11.1) 1.385(35.18) 1.335(33.91) .724(18.4)
.281 (7.1) .359 (9.1) .438(11.1) 1.510(38.35) 1.460(37.08) .724(18.4)
.250 (6.4) .344 (8.7) .464(11.8) 1.635(41.53) 1.585(40.26) .719(18.3)
.250 (6.4) .344 (8.7) .464(11.8) 1.760(44.70) 1.709(43.42) .719(18.3)
.250 (6.4) .344 (8.7) .464(11.8) 1.885(47.88) 1.835(46.61) .719(18.3)
G DIA
H
Recommended Panel
Cut-Out
TABLE ll: CONTACT SIZE
PRINTED CIRCUIT TAIL CONFIGURATIONS
CONTACT STYLE C AND D
P
SIZE 12 AND SIZE 16
.050 ± .015
(1.27 ± 0.38)
SIZE 22D AND SIZE 20 _P
Contact
Size
22D
20
16
12
øP
.011 (0.28)
.015 (0.38)
.024 (0.61)
.028 (0.71)
.0635 (1.61)
.0615 (1.56)
.095 (2.41)
.093 (2.36)
© 2013 Glenair, Inc.
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-35
E-Mail: [e-mail]