231-104-07 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Jam Nut Environmental Bulkhead Feed-Thru

231-104-07
Jam Nut Environmental Bulkhead Feed-Thru
MIL-DTL-38999 Series I Type
Connector Series
231 - D38999 Series I Type
Shell Style
07 - Jam Nut Mount
Shell Size
09
11
13
15
17
19
21
23
25
Insert Arrangement
Per MIL-DTL-38999 Series I
MIL-STD-1560
Alternate Key
Position
A, B, C, D
(N = Normal)
2.540 Max
1.810 Max
.585
Ref
B
231 - 104 - 07 M 11 - 35 P N - 01
Connector Type
104 - Env. Bulkhead Feed-Thru
A Thread
Hole for .032 Dia
Safety Wire, 3 Equally
Spaced
.125
.150 Max
Connector Material and Finish
M - Aluminum / Electroless Nickel
NC - Aluminum / Zinc-Cobalt
NF - Cad / O.D. Over Electroless Nickel (1000hr Salt Spray)
ZN - Aluminum Zinc-Nickel Olive Drab
MT - Aluminum / Ni-PTFE 1000 Hour Grey^TM
AL - Aluminum / Pure Electrodeposited Aluminum
Panel Accomodation
01 - .0625″ (Min) .125″ (Max)
02 - .0625″ (Min) .250″ (Max)
03 - .0625″ (Min) .500″ (Max)
Contact Termination
P - Pin on Jam Nut Side
S - Socket on Jam Nut Side
Panel
Accomodation
C
D
SHELL
SIZE
A THREAD
CLASS 2A
TABLE I: CONNECTOR DIMENSIONS
B DIA
MAX
C
HEX
D
FLATS
E DIA
±.005(0.1)
F +.000-.005
(0-0.1)
Insert arrangement, per
MIL-C-38999, Series l
MIL-STD-1560
E
09
.688-24 UNEF .573(14.6) .875(22.2) 1.062(27.0)
.703(17.9)
.669(17.0)
11
.813-20 UNEF .701(17.8) 1.000(25.4) 1.250(31.8)
.827(21.0)
.769(19.5)
E
Dia
13
1.000-20 UNEF .851(21.6) 1.188(30.2) 1.375(34.9) 1.015(25.8)
.955(24.3)
15
1.125-18 UNEF .976(24.8) 1.312(33.3) 1.500(38.1) 1.140(29.0) 1.084(27.5)
17
1.250-18 UNEF 1.101(28.0) 1.438(36.5) 1.625(41.3) 1.265(32.1) 1.208(30.7)
F
19
1.375-18 UNEF 1.208(30.7) 1.562(39.7) 1.812(46.0) 1.390(35.3) 1.333(33.9)
21
1.500-18 UNEF 1.333(33.9) 1.688(42.9) 1.938(49.2) 1.515(38.5) 1.459(37.1)
23
1.625-18 UNEF 1.458(37.0) 1.812(46.0) 2.062(52.4) 1.640(41.7) 1.580(40.1)
Recommended Panel Cut-Out
25
1.750-18 UNS 1.583(40.2) 2.000(50.8) 2.188(55.6) 1.765(44.8) 1.709(43.4)
APPLICATION NOTES
1. Power to a given contact on one end will result in power to contact
2. Metric Dimensions (mm) are indicated in parentheses
3.
Shell, lockring, jam nut—Al alloy, See Table II Page D-5
Contacts—Copper alloy/gold plate
Insulators—High grade rigid dielectric/N.A.
Bayonet Pins—CRES/passivate
Seals—silicone/N.A.
© 2010 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
E-4
E-Mail: [e-mail]