231-103-H7 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Jam Nut Mount Hermetic Bulkhead Feed-Thru

231-103-H7
Jam Nut Mount Hermetic Bulkhead Feed-Thru
MIL-DTL-38999 Series I Type
Connector Series
231 - D38999 Series I Type
Shell Style
H7 - Jam Nut Mount
Shell Size
09
11
13
15
17
19
21
23
25
Insert Arrangement
Per MIL-DTL-38999 Series I
MIL-STD-1560
Alternate Key
Position
A, B, C, D
(N = Normal)
2.040 (51.8)
1.310 (33.3)
.585
(14.9)
Ref
B
231 - 103 - H7 Z1 11 - 35 P N - 01
Connector Type
103 - Hermetic Bulkhead
Feed-Thru
Connector Material and Finish
FT - Carbon Steel, Fused Tin
Z1 - CRES, Passivated
ZL - CRES, Nickel Finish
E Dia
Contact Termination
P - Pin on Jam Nut Side
S - Socket on Jam Nut Side
A Thread
Hole For .032 Dia
Safety Wire, 3
Equally Spaced
.125 (3.2)
Panel Accomodation
01 - .0625″ (Min) .125″ (Max)
02 - .0625″ (Min) .250″ (Max)
03 - .0625″ (Min) .500″ (Max)
.150 (3.8) Max
Panel
Accomodation
F
Recommended Panel Cut-Out
TABLE I: CONNECTOR DIMENSIONS
F
SHELL
SIZE
09
A THREAD
CLASS 2A
.688-24 UNEF
B DIA
MAX
.573(14.6)
C
HEX
.875(22.2)
D
FLATS
1.062(27.0)
E DIA F +.000-.005
±.005(0.1)
(0-0.1)
.703(17.9) .669(17.0)
11 0.812-20 UNEF .701(17.8) 1.000(25.4) 1.250(31.8) .827(21.0) .769(19.5)
13 1.000-20 UNEF .851(21.6) 1.188(30.2) 1.375(34.9) 1.015(25.8) .955(24.3)
15 1.125-18 UNEF .976(24.8) 1.312(33.3) 1.500(38.1) 1.140(29.0) 1.084(27.5)
17 1.250-18 UNEF 1.101(28.0) 1.438(36.5) 1.625(41.3) 1.265(32.1) 1.208(30.7)
19 1.375-18 UNEF 1.208(30.7) 1.562(39.7) 1.812(46.0) 1.390(35.3) 1.333(33.9)
21 1.500-18 UNEF 1.333(33.9) 1.688(42.9) 1.938(49.2) 1.515(38.5) 1.459(37.1)
23 1.625-18 UNEF 1.458(37.0) 1.812(46.0) 2.062(52.4) 1.640(41.7) 1.580(40.1)
25 1.750-18 UNS 1.583(40.2) 2.000(50.8) 2.188(55.6) 1.765(44.8) 1.709(43.4)
C
D
Insert Arrangement per
MIL-DTL-38999, Series l
MIL-STD-1560
APPLICATION NOTES
1. Power to a given contact on one end will result in power to contact directly
opposite, regardless of identification letter.
2. Hermeticity = less than 1 x 10^-4 cc/sec at one atmosphere. Not for use in liquid
atmosphere.
Contacts – Gold Plated. Pin: alloy 52; Skt.: copper alloy
Insulator – fused vitreous glass/N.A.
Seals – fluorosilicone rubber/N.A.
4. Metric dimensions (mm) are indicated in parentheses.
3. Material/finish:
Shell, nut – CRES/passivated, carbon steel/fused tin or CRES/nickel per QQ-N-290.
© 2010 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
F-2
E-Mail: [e-mail]