189-015 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Environmental Banding Backshell

189-015
Environmental Banding Backshell
for Multichannel M85045 Shipboard Fiber Optic Cable
for Use with MIL-PRF-28876 or Glenair 180-040 Connectors
MIL-PRF-28876 and 189-015 banding backshell
How To Order
Product
Series
Material/
Finish
(Table II)
Dash No.
(Table III)
Band 600-052 Supplied
(Omit If Not Required)
189 - 015 NF 13 05 - 3 B
Basic No.
Shell Size
(Table I)
Length In 1/2 Inch
Increments
(Example: 3 = 1.5 Inches)
Spacer Ring
O-Ring
A Thread
.310
(7.9)
C
B
Dia.
Dia.
Length
L
ØK
Cable
Entry
Knurl Style
Mfr. Option
Straight Knurl
Internal Mechanical
Strain Relief
Anti-Rotation
Material and Plating
Adapter, Coupling Nut, Spacer Ring see Table II
J
Clamp Components: Ryton R 4XT-Black, Ultem 1000-Natural
Anti-Rotation Device: Torlon 42031-Natural
O-Ring: Fluorosilicone
Notes
Glenair 600 Series Backshell assembly tools are recommended for assembly and installation.
Standard minimum length: 1.5 inches, for shorter length consult factory.
Spacer Ring and O-Ring are packaged loose and must be installed with Connector at time of
assembly. The spacer is utilized to retain the terminus Insert.
For Shield termination see Glenair drawing 600-050 & 600-052.
Consult factory for larger cable size.
MIL-I-32053/4 & /5 Shrink sleeve to be packaged loose in a plastic bag.
MIL-I-32053/4 Shrink Sleeving to be heat shrink over rear of Adapter before
MIL-I-32053/5 Shrink Sleeving.
For assembly instructions, see GAP-064
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
J-18
E-Mail: [e-mail]