189-009 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Banding Backshell / Molding Adapter

189-009
Banding Backshell / Molding Adapter
For MIL-PRF-28876 Connectors
MIL-PRF-28876 banding backshell/molding adapter
How To Order
Product
Series
Basic No.
Shell Size
(Table I)
Length In 1/2 Inch
Increments
(Example: 04 = 2 Inches)
189 S 009 NF 15 08 - 04
Angular Function
(H, J, or S)
Material/Finish
(Table III)
Entry Size
(Table II)
Length
Length
A Thread
.140 /.130
N
.062
P
ØB
ØL ^ØM
J
Pressure Ring
O-Ring
C
STYLE 2, SYM S
Knurl Style Mfr.
Option
SYM S - STRAIGHT
Ø M Straight
Knurl
.310
Material and Finish
Adapters, Elbows, Coupling Nut, Pressure Ring: see Table II
Clamp Components: Ryton R 4XT-Black, Ultem 1000-Natural
O-Ring: Fluorosilicone
Notes
Assembly to be identified with manufacturer’s name and P/N, space permitting.
Standard minimum length for style 1: 1.5 inches, for Style 2: 2 inches.
Note: Length applies to SYM S, Straight only.
When cable diameter exceeds inside diameter of Connector Shell, Style 2 will be supplied.
Glenair 600 Series Backshell assembly tools are recommended for assembly and installation.
O-Ring and Pressure Ring to be packaged loose and must be installed with Connector at
time of assembly.
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
J-24
E-Mail: [e-mail]