189-007NH11S_10 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Fiber-Con Backshell

189-007
Fiber-Con Backshell
for MIL-PRF-28876 Connectors
Product
Series
Finish
(Table II)
Symbol
G - Gland Nut
T - Tubing Adapter
(Omit for Standard Shrink Boot Adapter)
189 - 007 NF 13 T 4
Basic Part
Number
Shell Size
(Table I)
Length in 1/2 Inch
Increments
(e.g. 3 = 1.5 Inches)
(See ^{Spacer Ring}
Note 4) _O-Ring
.310
(7.9)
D
A Thread
C
B
Dia
Length
(See Note 5)
Grommet
C
Dia
1.50 (38.1)
Max
Compression
Nut
SYM T
TUBING
ADAPTER
.190 (4.8)
Knurl Style Mfr Option
Positive Stop
APPLICATION NOTES
1. Assembly identified with manufacturer’s name and P/N,
space permitting.
2. Glenair 600 series Backshell assembly tools are recommended
for assembly and installation.
3. Material/ Finish:
Adapters, Coupling Nuts, Ferrule,
Compression Nut, Spacer Ring- Al Alloy
Grommet- Fluorosilicone/ N.A.
O-Ring- Fluorosilicone/ N.A.
4. Spacer Ring and O-Ring are packaged loose and must
be installed with connector at the time of assembly.
The spacer is utilized to retain the Terminus Insert
5. Standard minimum order is 1.5 inch
consult factory for shorter length.
6. Metric dimensions (mm) are indicated in parentheses.
.120 (03.0) Dia
4 Places
1.00 (25.4)
Max.
"PEEK" Helical
Convoluted
Tubing 120-100
(Not Supplied)
SHRINK BOOT
ADAPTER (STD)
SYM G
GLAND NUT
HOLE PATTERN
SHELL SIZE 13 SHOWN
© 2010 Glenair, Inc.
CAGE Codes 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
C-10
E-Mail: [e-mail]