189-007 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Fiber-Con Backshell

189-007
Fiber-Con Backshell
for MIL-PRF-28876 Connectors
MIL-PRF-28876 fiber-con backshell
How To Order
Product
Series
Material/Finish
(Table II)
SYM G = Gland Nut
SYM T = Tubing Adapter
Omit for Standard Shrink
Boot Adapter
189 - 007 NF 13 T 4
Basic No.
Shell Size
(Table I)
Length In 1/2 Inch
Increments
(Example: 4 = 2 Inches)
Spacer Ring
O-Ring
A Thread
.310
(7.9)
ØD
ØB
Length
Grommet
.19 Typ. (4.8)
Positive Stop
J
Knurl Style Mfr. Option
Material and Finish
Adapters, Coupling Nuts, Ferrule, Compression Nut, Spacer Ring: see table II
Grommet: Fluorosilicone
O-Ring: Fluorosilicone
Notes
Glenair 600 Series Backshell assembly tools are recommended for assembly and installation.
Spacer Ring and O-Ring are packaged loose and must be installed with Connector at time of
assembly. The Spacer is utilized to retain the Terminus Insert.
Standard minimum order is 1.5 inch. Consult factory for shorter length.
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
J-22
E-Mail: [e-mail]