181-040-15 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Size 16 Fiber Optic Socket Terminus

M29504/15
181-040
Size 16 Fiber Optic Socket Terminus
For MIL-PRF-28876 Connectors
M28876
QPL
Size 16 M29504/15 fiber optic socket terminus for MIL-PRF-28876 connectors
Mil-Spec Part
Number
M29504/15-4180C
Not listed in
Mil-Spec
M29504/15-4181C
M29504/15-4171C
M29504/15-4172C
M29504/15-4175C
Table I: Part Number
ØA (Microns)
Fiber Type
Fiber Size
Core/Cladding
(Microns)
125.0
Single Mode 9/125
125.5
Single Mode 9/125
126.0
Single Mode 9/125
126.0
Multi Mode
50/125, 62.5/125
127.0
Multi Mode
50/125, 62.5/125
142.0
Multi Mode
100/140
Consult factory for additional sizes and QPL status.
Commercial Part
Number
181-040-1250C
181-040-1255C
181-040-1260C
181-040-1260C
181-040-1270C
181-040-1420C
Crimp Sleeve
Terminus
Assembly
.955 (24.3) Max
.800 (20.3) Max
Ø .118 (3.0)
Max
Retaining
Clip
.158 (4.0)
Min
Alignment
Sleeve
ØA
Ferrule
Hole
Ø .118 (3.0)
Max
Environmental
Seal
Ø .102 (2.6)
Max
Ferrule
Protective
Cover
Ø .0788/.0787
(2.0) Ferrule O.D.
Table II: Tools and Accessories
Material and Finish
Part
J
Number
Description
Crimp Sleeve
Alignment Sleeve, Ferrule: Zirconia Ceramic
Protective cover: Spring Alloy / Nickel
Terminus Assembly: Stainless Steel / Passivate
265-008
Ø 2.4mm Max Jacket
Retaining Clip: Spring Alloy
(Mil-Spec Type)
Seal: Fluorosilicone
265-010
Alignment Sleeve
Assembly
Crimp Sleeve: Brass Alloy / Nickel
182-012
182-013
Crimp Tool
Insertion Tool, Straight
Notes
• Crimp sleeve is supplied with terminus assembly and may be ordered separately (see Table
182-014
Insertion Tool, 90°
II). For terminus less crimp sleeve omit C from end of part number.
182-015
Removal Tool
• Alignment sleeve assembly is supplied with terminus assembly (packaged loose) and may
182-016
182-035
Alignment Sleeve
Assembly
Insertion/Removal Tool
Hand Polishing
Tool
be ordered separately (see Table II). For terminus less alignment sleeve assembly, add N to
end of part number (e.g. 181-040-1260CN).
• See Glenair GAP-036 for termination procedure and assembly tools.
• Dummy Terminus: Part Number 181-051 or M29504/3-4038.
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
J-4
E-Mail: [e-mail]