181-040-1250C Datasheet, PDF (1/1 Pages) Glenair, Inc. – M29504/15 Style Front Release Socket Terminus

181-040
M29504/15 Style Front Release Socket Terminus
Size 16
Product Series
Basic Number
Dash Number
(Table I)
181-040-1260 C N
N = Alignment Sleeve Assembly Not required
(Omit to receive Alignment Sleeve)
Crimp Sleeve Designator
Omit if None (See Table II)
.118 (3.0) .080 (2.0)
.114 (2.9) .074 (1.9)
Dia
Dia
Crimp Sleeve
(See Note 3)
.955 (24.3) Max
.800 (20.3) Max
Retaining Clip
Terminus
Assembly
.277 (7.0)
.267 (6.8)
(See Note 6)
Alignment
Sleeve
.158
(4.0)
Max
.158
(4.0)
Min
A Dia
Ferrule
Hole
.118 (3.0)
.115 (2.9)
Dia
Environmental Seal
Ferrule
Protective Cover
TABLE I: DASH NUMBER
Assembly
Dash Number
A
Dia (Microns)
1250
126.0
125.0
1255
126.5
125.5
1260
127.0
126.0
1270
128.0
127.0
1420
143.0
142.0
Consult Factory for Additional Sizes
TABLE II:
CRIMP SLEEVE
DESIGNATOR
Designator
Cable
Diameter
Part
Number
C
2.0-2.4 mm
265-008
(MIL-Spec)
TABLE III: TERMINUS
ACCESSORIES
Part Number
Accessory
265-010
182-012
182-013
182-014
182-015
182-016
182-017
Alignment Sleeve Assembly
Crimp Tool
Insertion Tool, Straight
Insertion Tool, 90°
Removal Tool
Alignment Sleeve Assembly
Insertion/Removal Tool
Hand Polishing Tool
APPLICATION NOTES
1. Assembly packaged in plastic bag and tag identified with manufacturer’s
name and part number
2. Material/ Finish:
Alignment Sleeve, Ferrule: Zirconia Ceramic/ N.A.
Protective cover: Spring Alloy / Nickel
Terminus Assembly: Stainless Steel / Passivate
Retaining Clip: Spring Alloy / N.A.
Seal: Fluorosilicone
Crimp Sleeve: Brass Alloy / Nickel
3. Alignment Sleeve Assembly and Crimp Sleeve
may be ordered separately (Tables II and III)
4. Metric dimensions (mm) are in parentheses.
5. Dummy Terminus: Part Number 181-051
6. Dimension to be measured when installed into insert
equivalent fixture per MIL-PRF-29504/15
© 2006 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-2
E-Mail: [e-mail]