181-039-1250C Datasheet, PDF (1/1 Pages) Glenair, Inc. – M29504/14 Style Front Release Pin Terminus Size 16

181-039
M29504/14 Style Front Release Pin Terminus
Size 16
Product Series
Basic Number
Dash Number
(Table I)
181-039-1260 C
C = Crimp Sleeve Designator
Omit if None (See Table II)
.118 (3.0) ^{.080 (2.0)}
.114 (2.9) ^{.074 (1.9)}
Dia
Dia
Crimp Sleeve
(See Note 5)
.900 (22.9)
Max
Retaining Clip
Terminus
Assembly
Environmental Seal Spring Washers
.384 (9.8)
.372 (9.4)
(See Note 6) ^.158
.102 (2.6)
Max Dia
(4.0)
Min
A Dia
Ferrule
Hole
.0788
.0787
Dia
Ferrule
TABLE I: DASH NUMBER
Assembly
Dash Number
A
Dia (Microns)
1250
126.0
125.0
1255
126.5
125.5
1260
127.0
126.0
1270
128.0
127.0
1420
143.0
142.0
Consult Factory for Additional Sizes
TABLE II:
CRIMP SLEEVE
DESIGNATOR
Designator
Cable
Diameter
Part
Number
C
2.0-2.4 mm
265-008
(MIL-Spec)
TABLE III: TERMINUS
ACCESSORIES
Part Number
Accessory
182-012
182-013
182-014
182-015
182-017
Crimp Tool
Insertion Tool, Straight
Insertion Tool, 90°
Removal Tool
Hand Polishing Tool
APPLICATION NOTES
1. Assembly packaged in plastic bag and tag identified
with manufacturer’s name and part number.
2. Material/ Finish:
Ferrule: Zirconia Ceramic/ N.A.
Terminus Assembly: Stainless Steel/ Passivate
Retaining Clip, Spring Washers: Spring Alloy / N.A.
Seal: Fluorosilicone
Crimp Sleeve: Brass Alloy/Nickel
3. Crimp Sleeve may be ordered separately (Table II).
4. Metric dimensions (mm) are in parentheses
5. Dummy Terminus: Part Number 181-051
6. Dimension to be measured when installed into insert
equivalent fixture per MIL-PRF-29504/14
© 2006 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-3
E-Mail: [e-mail]