181-035-15 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Large Core Optical Fiber Socket Terminus

181-035
Large Core Optical Fiber Socket Terminus
MIL-DTL-38999 Series III Type
D38999
Series III
Large core fiber optic MIL-DTL-38999 type size 16 socket terminus
B
Part Number
Fiber Size
Core/Cladding
(Microns)
ØA
(Microns)
Part
Number
Accessories
Terminus Accessory
181-035-600
600 Micron
610.0
181-001-S
Ceramic Alignment Sleeve
181-035-1000
1000 Micron
(Plastic)
1117.0
Ceramic alignment sleeve supplied with terminus.
181-001-K
181-001-C
Stainless Steel Alignment Sleeve
Protective Cover
Add K to the end of part number development
to supply with optional stainless steel alignment
sleeve e.g. 181-035-1000K.
.100
ØA
Ø .117
Max
Ø .062
Alignment Sleeve
Protective Cover
.158 Min
1.024
.917
.537
Ø .130 Max.
Ø .103 Max.
.346
See Notes below
Bottoming Surface
Protective Cover
.265
Alignment Sleeve
Material and Finish
Ferrule: Stainless Steel/Passivate
Alignment Sleeve: Zirconia Ceramic or Stainless Steel/Passivate
Terminus Assembly: Stainless Steel/Passivate
Spacer, Spring, and Cover: Stainless Steel/Passivate
Notes
Alignment sleeve and protective cover can also be ordered separately (see Accessories table)
Threaded Protective cover must be retained using Threadlocker “Loctite 222” prior to
insertion and fully seated against terminus body as shown.
Contact Glenair for termination/assembly procedures.
Recommended Insertion/Extraction Tool: P/N M81969/14-03 or equivalent
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-5
E-Mail: [e-mail]