181-001-125 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Size 16 Fiber Optic Socket Terminus

181-001
Size 16 Fiber Optic Socket Terminus
MIL-PRF-29504/5
181-001-126 K
Product Series
Basic Number
Dash Number
(Table I)
K = Stainless
Steel Alignment Sleeve
(Omit for Ceramic Alignment Sleeve)
Protective Cover
Alignment Sleeve
A Dia
.062 (1.6) Dia
.346 (8.8)
.246 (6.7)
o .113 (2.9)
o.082 (2.1)
PROTECTIVE COVER ALIGNMENT SLEEVE
(Included with Terminus)
.110 (2.8)
.092 (2.3)
1.132 (28.8)
1.025 (26.0)
.537 (13.6)
o .130 Max
.069 (1.8) Dia
.116 (3.0)
.114 (2.9)
Dia
Shrink Tube
.500 (12.7)
.080 (2.0) Max
Dia. Cable
See Note 5
Bottoming Surface
APPLICATION NOTES
1. Assembly packaged in plactic bag and tag identified with
manufacturer’s name and part number.
2. Material/ Finish:
Ferrule, Alignment Sleeve: Zirconia Ceramic/N.A.
or Stainless Steel/Passivate.
Terminus Assembly: Stainless Steel/Passivate
Spacer, Spring, and cover: Stainless Steel/Passivate
Shrink Tube: Kynar/N.A
3. Alignment Sleeve & Protective Cover can also be ordered
separately (Table II).
4. Metric dimensions (mm) are indicated in parentheses.
5. Threaded protective cover must be retained using Thread
locker “Loctite 222” prior to insertion and fully seated
against Terminus body as shown. See Assembly Proce-
dure on page B-8 for complete termination instruction.
6. See 182-001S for Socket Terminus Polishing Tool.
7. Recommended insertion/removal tool:
P/N: M81969/14-03 or equivalent
8. Consult factory for qualification status.
© 2006 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-2
E-Mail: [e-mail]