180-153 Datasheet, PDF (1/2 Pages) Glenair, Inc. – GFOCA Internal Mount Jam Nut

180-153
GFOCA Internal Mount Jam Nut
Receptacle with Strain Relief
MIL-DTL-83526 Type, 4 Channel
GFOCA
MIL-DTL-83526 type hermaphroditic GFOCA internal mount jam nut receptacle with
strain relief
How To Order
Product
Series
Material/Finish
(Table I)
Alignment
Sleeve
Style
(Table III)
Dust Cover
Style
(Table V)
180 - 153 ZR - 01 N 1 F 1
Basic No.
Cable Entry
(Table II)
(See notes)
Insert Cap Key
Dash No.
(Table IV)
Seal Material
(Table VI)
(See notes)
Bend restrictor design mfr’s
option
5.275
.250 Panel
.050 Thk
Back Nut
2.00 Max (when dust cover is installed)
1.200
Max
1.375 Max
Hex
1.134 Max
Flat
Alignment Pin
1.390
Max
Seal
Dust
Cover
P1
P2
S1
S2
1
Ø1.555
Max
Cable Diameter
See Table II
Shell
Jam Nut
Ø1.681
Max
Seal
Lanyard with Ring
I
Removable
insert cap
2X Alignment
Mating Plane
Attachment
Sleeve
1.0625-.1P-.2L-DS-2A
Detail A
2X Screw
3/32" Hex
1.145
1.140
Ø 1.200
1.190
Material and Finish
External hardware: See Table I
Internal hardware: Al alloy/anodize
Misc. hardware: Stainless steel/passivate
Lanyard: Stainless steel/coated
Strain relief wedge: Copper alloy/nickel
Seals: See Table VI
Panel Cut-out
As viewed from
front of panel
Notes
Connector assembly is designed IAW the interface requirements of MIL-PRF-83526/17 (Draft).
Standard configuration is shown in sample part number.
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
I-16
E-Mail: [e-mail]