180-146 Datasheet, PDF (1/2 Pages) Glenair, Inc. – GFOCA Jam Nut Mount Receptacle

180-146
GFOCA Jam Nut Mount Receptacle
MIL-DTL-83526/17 Type, 4 Channel
GFOCA
MIL-DTL-83526/17 type hermaphroditic GFOCA jam nut receptacle, 4 channel
How To Order
Product
Series
Material/Finish
(Table I)
Insert Cap Key
Dash No..
(Table III)
Seal Material
(Table V)
(See notes)
180 - 146 ZR - N 1 F 1
Basic No.
Alignment
Sleeve
Style
(Table II)
Dust Cover
Style
(Table IV)
.250 Panel
.090 thickness
1.720 Max (when dust cap is installed)
1.375 Max
Hex
.518 Max
Retainer
nut
.798 Max
Detail A
Alignment
pins
Seal
1.390
Max
Dust
cover
4-48 UNF-2B
Terminus
retainer
plate
Ø1.760
1
Max
Ø1.555
Max
I
Seal
Removable
insert cap
2X Alignment
1.134 Max
Flat
1.1875-18
UNEF-2A
Jam nut
Mating plane
Lanyard
Sleeve
1.0625-.1P-.2L-DS-2A
2X Screw
3/32" Hex
Detail A
1.145
1.140
Ø 1.200
1.190
Material and Finish
External hardware: See Table I
Internal hardware: Al alloy/anodize
Misc. hardware: Stainless steel/passivate
Lanyard: Stainless steel/coated
Strain relief wedge: Copper alloy/nickel
Seals: See Table V
Panel Cut-out
As viewed from
front of panel
Notes
Connector assembly is designed IAW the interface requirements of MIL-DTL-83526/17 (Draft).
Standard configuration is shown in sample part number.
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
I-6
E-Mail: [e-mail]