180-145 Datasheet, PDF (1/2 Pages) Glenair, Inc. – GFOCA Hermaphroditic Plug Connector

180-145
GFOCA Hermaphroditic Plug Connector
MIL-DTL-83526/16 Type, 4 Channel
GFOCA
MIL-DTL-83526/16 type plug-to-plug hermaphroditic GFOCA connector, 4 channel
How To Order
Product
Series
Material/Finish
(Table I)
Alignment
Sleeve
Style
(Table III)
Dust Cover
Style
(Table V)
180 - 145 G2 - 01 N 1 H 1
Basic No.
Cable Entry
(Table II)
(See notes)
Insert Cap Key
Dash No..
(Table IV)
Seal Material
(Table VI)
(See notes)
1.250
Max
Mating plane
Seal
Mating plane
2.377
Max
9.127 Max
when dust cover is installed
6.750
Max
Ø1.555
Max
4.80 Max
rigid length
Coupling nut
Wave spring
Bend restrictor design
mfr’s option
P1
P2
S1
S2
1
Seal
I
“M” Dust Cover
“H” Dust Cover
Lanyard
See Table V
See Table V
Alignment pin
Detail A
Compression
nut
2X set screw
.050" hex
Cable Diameter
See Table II
Seal
Removable
insert cap
2X screw
3/32" hex
2X alignment
sleeve
1.0625-.1P-.2L-DS-2A
Detail A
Material and Finish
External hardware: See Table I
Internal hardware: Al alloy/anodize
Misc. hardware: Stainless steel/passivate
Lanyard: Stainless steel/coated
Strain relief wedge: Copper alloy/nickel
Seals: See Table VI
Notes
Connector assembly is designed IAW the interface requirements of MIL-DTL-83526/16 (Draft).
Standard configuration is shown in sample part number.
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
I-4
E-Mail: [e-mail]