152_004 Datasheet, PDF (1/1 Pages) Glenair, Inc. – In-Line Receptacle

HIPER 55116
In-Line Receptacle
152-004
SHORT-LENGTH IN-LINE RECEPTACLE WITH SHIELD TERMINATION PORCH, INTEGRATED
OVERMOLDING/SEALING BOOT FEATURE AND NON-RIGID SPRING CONTACTS
MATES WITH 152-001 AND 152-002, 151-001 AND 151-002, AND STANDARD MIL-DTL-55116 PLUGS
How To Order
Sample Part Number
152-004
-1 -3
Series
Connector Configuration
(See Table I)
Size
HiPer 55116 in-line receptacle
-1 = 5 pin, crimp
-2 = 6 pin, crimp
-3 = 5 pin, solder cup
-4 = 6 pin, solder cup
-1 = .165 ± .010
-2 = .228 ± .010
-3 = .250 ± .010
-4 = .290 ± .010
-5 = .320 ± .010
ø.836
.826
1.850 MAX
.510
.480
SHRINK BOOT WITH
EPOXY ADHESIVE
.386
ø ^.594
.590
SHRINK BOOT
GROOVE
Table I: Connector Configuration
MATERIALS AND FINISHES
Shells and backshells: Stainless steel/PTFE-nickel plated (matte finish)
Inserts: Diallylphthalate resin type SDG-F
Seals: Ethylene propylene rubber
Contacts: Copper alloy/gold plate
5 Contacts
152-004-1
152-004-2
152-004-3
152-004-4
6 Contacts
M55116/11 type
(U-228) Receptacle,
5 Crimp Contacts
M55116/12 type
(U-228) Receptacle,
6 Crimp Contacts
M55116/13 type
(U-228) Receptacle,
5 Solder Cup Contacts
M55116/14 type
(U-228) Receptacle,
6 Solder Cup Contacts
NOTES
Connectors are identified with Glenair’s name, part number and date code
Meets interface configurations and IAW specifications of MIL-DTL-55116 Type C, and exceeds
the following:
Shell-to-shell conductivity: 2.5 milliohms max.
Cable shield-to-shell conductivity: 2.5 milliohms max.
Contact resistance (mated): 15 milliohms max. average; 20 milliohms max.
Pressure sealing (mated & un-mated): IP68 (10 meters of standing water for 1 hour)
Salt atmosphere: 1,000 hours (MIL-STD-202, Method 101E)
Cable pull-out force (unmated): 100 lbf. (Cable shield strength dependent)
8 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324