152_003 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Radio-Mount Jam Nut Receptacle

HIPER 55116
Radio-Mount Jam Nut Receptacle
152-003
RADIO-MOUNT JAM NUT RECEPTACLE WITH NON-RIGID SPRING CONTACTS
MATES WITH 152-001 AND 152-002, 151-001 AND 151-002, AND STANDARD MIL-DTL-55116 PLUGS
.915
How To Order
.905
.792 ^{Sample Part Number}
152-003
-1
3
.782
Series
HiPer 55116 radio-mount jam nut receptacle
3
.750-20 UNEF-2A
Connector Conf^.i²g²u⁰ r^Ra^Et^Fion -1 = 5 pin, solder cup
(See Table I)
-2 = 6 pin, solder cup
Ø
.594
.590
Ø
.765
.755
.077 REF
Ø
.963
.953
.750-20 UNEF-2A
.915
.905
.792
.782
Ø
.594
.590
.657
.653
Recommended Panel Hole
(Standard per MIL-DTL-55116)
.650
.640
Ø
.765
.755
.077 REF
All dimensions are compliant with MIL-DTL-55116/9 and /10
.220 REF
Table I: Connector Configuration
.657
.653
Recommended Panel Hole
MATERIALS AND FINISH(EStSandard per MIL-DTL-55116)
Shells and backshells: Stainless steel/PTFE-nickel plated (matte finish)
Inserts: Diallylphthalate resin type SDG-F
Seals: Ethylene propylene rubber
Contacts: Copper alloy/gold plate
5 Contacts
152-003-1
152-003-2
6 Contacts
M55116/9 type
(U-183) Receptacle,
5 Solder Cup Contacts
M55116/10 type
(U-183) Receptacle,
6 Solder Cup Contacts
NOTES
Connectors are identified with Glenair’s name, part number and date code.
Meets interface configurations and IAW specifications of MIL-DTL-55116 Type C, and exceeds
the following:
Shell-to-shell conductivity: 2.5 milliohms max.
Cable shield-to-shell conductivity: 2.5 milliohms max.
Contact resistance (mated): 15 milliohms max. average; 20 milliohms max.
Pressure sealing (mated & un-mated): IP68 (10 meters of standing water for 1 hour)
Salt atmosphere: 1,000 hours (MIL-STD-202, Method 101E)
Cable pull-out force (unmated): 100 lbf. (Cable shield strength dependent)
10 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324