152_002 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Audio Plug

HIPER 55116
Audio Plug with shield termination porch
and overmolding adapter
152-002
AUDIO PLUG WITH INTEGRATED EMI GROUND SPRING, SHIELD TERMINATION PORCH, INTEGRATED
OVERMOLDING/SEALING BOOT FEATURE AND RIGID CONTACTS
MATES WITH 152-003 AND 152-004, 151-003 AND 151-004, AND STANDARD MIL-DTL-55116 RECEPTACLES
IP68 Rated
Sealing
Integrated EMI
Ground Spring
How To Order
Sample Part Number
152-002
-1 -3
Series
Connector Configuration
(See Table I)
Size
HiPer 55116 Audio plug with overmold adapter
-1 = 5 pin, crimp
-2 = 6 pin, crimp
-3 = 5 pin, solder cup
-4 = 6 pin, solder cup
-1 = .165 ± .010
-2 = .228 ± .010
-3 = .250 ± .010
-4 = .290 ± .010
-5 = .320 ± .010
1.590/1.560
48°
.720
SHRINK BOOT WITH
.690
EPOXY ADHESIVE
1.018
ø ^.836
.826
GROUND/EMI SPRING
(360° COVERAGE)
SHRINK BOOT
GROOVE
Table I: Connector Configuration
MATERIALS AND FINISHES
Shells and backshells: Stainless steel/PTFE-nickel plated (matte finish)
Inserts: Diallylphthalate resin type SDG-F
Seals: Ethylene propylene rubber
Contacts: Copper alloy/gold plate
5 Contacts
152-002-1
152-002-2
152-002-3
152-002-4
6 Contacts
M55116/5 type
(U-229) Plug,
5 Crimp Contacts
M55116/6 type
(U-229) Plug,
6 Crimp Contacts
M55116/7 type
(U-229) Plug,
5 Solder Cup Contacts
M55116/8 type
(U-229) Plug,
6 Solder Cup Contacts
NOTES
Plugs are identified with Glenair’s name, part number and date code
Meets interface configurations and IAW specifications of MIL-DTL-55116 Type C, and exceeds
the following:
Shell-to-shell conductivity: 2.5 milliohms max.
Cable shield-to-shell conductivity: 2.5 milliohms max.
Contact resistance (mated): 15 milliohms max. average; 20 milliohms max.
Pressure sealing (mated & un-mated): IP68 (10 meters of standing water for 1 hour)
Salt atmosphere: 1,000 hours (MIL-STD-202, Method 101E)
Cable pull-out force (unmated): 100 lbf. (Cable shield strength dependent)
4 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324