121-102-1-1-06BECE Datasheet, PDF (1/1 Pages) Glenair, Inc. – Helical Convoluted Tubing (MIL-T-81914) Natural or Black PFA, FEP, PTFE, Tefzel (ETFE) or PEEK

121-102 - Type E
Series 74 Helical Convoluted Tubing (MIL-T-81914) Natural or
Black PFA, FEP, PTFE, Tefzel^® (ETFE) or PEEK
121-102-1-1-16 B E T S
Product
Series
Basic No.
Class
1 = Standard Wall
2 = Thin Wall *
Convolution
1 = Standard
2 = Close
Dash No. (Table I)
Color
B = Black, C = Natural
OUTER SHIELD
INNER SHIELD
TUBING
Outer Shield
N = Nickel/Copper
S = SnCuFe
T = Tin/Copper
C = Stainless Steel
Inner Shield
N = Nickel/Copper
S = SnCuFe
T = Tin/Copper
Material
E = ETFE
F = FEP
K = PEEK ***
P = PFA
T = PTFE**
TYPE
E
TWO
EXTERNAL
SHIELDS
A DIA
B DIA
LENGTH
(AS SPECIFIED IN FEET)
MINIMUM
BEND RADIUS
DASH FRACTIONAL
NO. SIZE REF
06
3/16
09
9/32
10
5/16
12
3/8
14
7/16
16
1/2
20
5/8
24
3/4
28
7/8
32
1
40
1 1/4
48
1 1/2
56
1 3/4
64
2
TABLE I
A INSIDE
B DIA
DIA MIN
MAX
.181 (4.6)
.420 (10.7)
.273 (6.9)
.514 (13.1)
.306 (7.8)
.550 (14.0)
.359 (9.1)
.610 (15.5)
.427 (10.8)
.671 (17.0)
.480 (12.2)
.750 (19.1)
.603 (15.3)
.870 (22.1)
.725 (18.4)
1.030 (26.2)
.860 (21.8)
1.173 (29.8)
.970 (24.6)
1.326 (33.7)
1.205 (30.6)
1.639 (41.6)
1.437 (36.5)
1.932 (49.1)
1.688 (42.9)
2.182 (55.4)
1.937 (49.2)
2.432 (61.8)
MINIMUM
BEND RADIUS *
.50 (12.7)
.75 (19.1)
.75 (19.1)
.88 (22.4)
1.00 (25.4)
1.25 (31.8)
1.50 (38.1)
1.75 (44.5)
1.88 (47.8)
2.25 (57.2)
2.75 (69.9)
3.25 (82.6)
3.63 (92.2)
4.25 (108.0)
* The minimum bend radius is based on Type A construction (see page D-3). For
multiple-braided coverings, these minumum bend radii may be increased slightly.
Metric dimensions (mm)
are in parentheses.
* Consult factory for
thin-wall, close
convolution combina-
tion.
** For PTFE maximum
lengths - consult
factory.
*** Consult factory for
PEEK min/max
dimensions.
© 2003 Glenair, Inc.
CAGE Codes 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-7
E-Mail: [e-mail]