120-100-1-1-06BE Datasheet, PDF (1/1 Pages) Glenair, Inc. – Helical Convoluted Tubing Natural or Black PFA, FEP, PTFE, Tefzel (ETFE) or PEEK Type A - Tubing Only - No Braid

TYPE
A
TUBING
ONLY
NO BRAID
120-100
Series 74 Helical Convoluted Tubing (MIL-T-81914)
Natural or Black PFA, FEP, PTFE, Tefzel^® (ETFE) or PEEK
Type A - Tubing Only - No Braid
120-100-1-1-16 B E
Product Series
Basic Number
Class
1 = Standard Wall
2 = Thin Wall (See Note 1)
Convolution
1 = Standard
2 = Close
Material
E = ETFE
F = FEP
P = PFA
T = PTFE (See Note 2)
K = PEEK (See Note 3)
B = Black
C = Natural
Dash Number
(Table I)
Length
(As Specified In Feet)
A DIA
B DIA
APPLICATION NOTES
1. Consult factory for thin-wall, close convolution combination.
2. Consult factory for PTFE maximum lengths.
3. Consult factory for PEEK min/max dimensions.
4. Metric dimensions (mm) are in parentheses.
MINIMUM
BEND RADIUS
Dash
No.
06
09
10
12
14
16
20
24
28
32
40
48
56
64
TABLE I: TUBING SIZE
Fractional
Size Ref
A Inside
Dia Min
B Dia
Max
3/16
.181 (4.6) .320 (8.1)
9/32
.273 (6.9) .414 (10.5)
5/16
.306 (7.8) .450 (11.4)
3/8
.359 (9.1) .510 (13.0)
7/16
.427 (10.8) .571 (14.5)
1/2
.480 (12.2) .650 (16.5)
5/8
.603 (15.3) .770 (19.6)
3/4
.725 (18.4) .930 (23.6)
7/8
.860 (21.8) 1.073 (27.3)
1
.970 (24.6) 1.226 (31.1)
1-1/4
1.205 (30.6) 1.539 (39.1)
1-1/2
1.437 (36.5) 1.832 (46.5)
1-3/4
1.688 (42.9) 2.156 (54.8)
2
1.937 (49.2) 2.332 (59.2)
Minimum
Bend Radius
.500 (12.7)
.750 (19.1)
.750 (19.1)
.880 (22.4)
1.000 (25.4)
1.250 (31.8)
1.500 (38.1)
1.750 (44.5)
1.880 (47.8)
2.250 (57.2)
2.750 (69.9)
3.250 (82.6)
3.630 (92.2)
4.250 (108.0)
© 2006 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
J-2
E-Mail: [e-mail]