100-041-01N5A Datasheet, PDF (1/1 Pages) Glenair, Inc. – Tapered Tubular Metal Braid Nickel/Copper, Silver/Copper or Tin/Copper for Series 72 & 74 Tubing and Series 75 Conduit

100-041
Tapered Tubular Metal Braid Nickel/Copper, Silver/Copper or
Tin/Copper for Series 72 & 74 Tubing and Series 75 Conduit
100-041-06 N 5 A
Product Series
Dash No. (Table I or II)
Material
N = Nickel/Copper
S = Silver/Copper
T = Tin/Copper
A = 36 AWG (Omit for 34 AWG)
Length in 1 inch increments
Order Length
5.0 (127.0) Minimum
12.0 (304.8) Maximum
3.0
(76.2)
Min.
Dash no.'s 02-12 flared or
folded back in this area.
A
B
Dash
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
TABLE I
A
+ .10 (2.5)
- .00 (0.0)
.30 (7.6)
.45 (11.4)
.60 (15.2)
.75 (19.1)
.75 (19.1)
1.05 (26.7)
1.05 (26.7)
1.20 (30.5)
1.20 (30.5)
1.50 (38.1)
1.50 (38.1)
1.50 (38.1)
.88 (22.4)
1.38 (35.1)
B
+ .10 (2.5)
- .00 (0.0)
.15 (3.8)
.30 (7.6)
.30 (7.6)
.30 (7.6)
.50 (12.7)
.50 (12.7)
.75 (19.1)
.75 (19.1)
1.00 (25.4)
.75 (19.1)
1.00 (25.4)
1.20 (30.5)
.50 (12.7)
.75 (19.1)
Consult with the factory for custom tapered braid configurations.
Metric dimensions (mm) are indicated in parentheses.
© 2003 Glenair, Inc.
CAGE Codes 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
H-4
E-Mail: [e-mail]