LX24T3 Datasheet, PDF (1/2 Pages) Gilway Technical Lamp – Linear Excimer Lamp

Technical Information
No. FO 5042
Edition: 03/03 - subject to change
Supersedes:
Status: initial
Linear Excimer Lamp
LINEX^ LX24T3/956/A4
„ Product description
The OSRAM LINEX^ LX24T3/956/A4 is a dielectric barrier discharge lamp system. It consists of an aperture lamp
and an inverter. It is especially used for the exposure process in digital copiers and scanners. The lamp provides
an illuminance of 48,000 lux in white (triphosphor). The Xenon gas discharge enables instant light within a few
milliseconds. The light output shows no temperature dependence as well as a steady light emission. Since OSRAM
patented internal electrodes are used no high voltage isolation is needed.
15
235
15
2
11.5
3.1
8
2
75°
5
„ Lamp technical data ¹
Order reference
LX24T3/956/A4
Lamp overall length Lo
mm 267,5
System power consumption W 24
Inner emission length Li
mm
Lamp operating frequency KHz > 80
80% of center illuminance mm 180
Rated lamp voltage
Illuminance ²
Color coordinates ²: x / y
KV < 3
Lx 48,000
0.324 / 0.336
Outer diameter base D
Outer diameter glass tube
Aperture α
mm
mm 10.0
deg. 75
Maintenance >80%
Hrs. 1000
Lamp weight
g 24
Cable length
mm 230
1 _{ambient room temperature of 25°C}
Note: lamp base design on customer request possible
2 _{measured at a distance of 8mm from the aperture by Minolta T-1M}
„ DC-HV inverter technical data ¹
Order reference
QT LINEX^ 1x24/24
Inverter size
Mm 135 (L) x 40 (W) x 28 (H)
Inverter weight
G
110
Nominal/Min./Max. input voltage Vdc 24 / 21.6 / 26.4
Nominal/Maximum input current A
Typical input inrush current ³
A
3 _{switch on by lamp enable}
1.0 / 1.1
2
The inverter provides an electrical pulse wave to the lamp.
The lamp system is covered by one or more of the following patents:
WO 94/23442, WO 98/49712. Other patents not listed may apply or pending.
Photo Optics Berlin