430NM Datasheet, PDF (1/9 Pages) Gilway Technical Lamp – SMT LEDs

SOLDERING INSTRUCTIONS FOR THROUGH HOLE LEDs
DIP AND WAVE SOLDERING
Temperature Maximum
of the Soldering Soldering
Bath
Time
Distance from
Solder Joint
to Case
IRON SOLDERING (with 1.5mm IRON TIP)
Temperature Maximum
of the Soldering Soldering
Iron
Time
Distance From
Solder Joint
to Case
≤260^oC
3s
>2mm
≤260^oC
3s
>2mm
≤260^oC
5s
>4mm
≤260^oC
5s
>4mm
RECOMMENDED SOLDERING PATTERN FOR SMT LEDs
1
2
3
4
5
6
7
8
9
10
Telephone: [phone]
Fax: [phone]
84
SOLDERING INSTRUCTIONS FOR SMT LEDs
Surface Mount LEDs are temperature sensitive and must be
handled with extreme care. IR Reflow Soldering and Vapor Phase
Reflow Soldering are recommended. Wave Soldering is not recom-
mended for surface mount LEDs. Please request our SMT LED
Soldering Notes 155-1209.
Note: Above dimensions in millimeters
[e-mail]
www.gilway.com
Engineering Catalog 169