0571P Datasheet, PDF (7/14 Pages) Gennum Corporation – Low leakage current

uClamp0571P - uClamp3671P
PROTECTION PRODUCTS
Typical Characteristics
Non-Repetitive Peak Pulse Power vs. Pulse Time
100
T_A = 25^OC
10
1500W @ 20uS
1350W @ 20uS
1
1200W @ 20uS
0.1
0.1
1
10
100
Pulse Duration - tp (µs)
1000
Clamping Voltage vs. Peak Pulse Current (tp=8/20us)
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
0
uClamp3671P
uClamp2271P
T_A = 25^OC
Waveform: tp=8x20us
uClamp1571P
uClamp1271P
uClamp1071P
uClamp0871P
uClamp0571P
10 20 30 40 50 60 70 80 90
Peak Pulse Current - I_PP (A)
Forward Voltage vs. Peak Pulse Current (tp=8/20us)
TLP Characteristic
6
40
T_A = 25^OC
Transmission Line Pulse Test (TLP)
5
Waveform: tp= 8x20us
35
uClamp1071P
uClamp0871P
Settings:
tp = 100ns, tr = 0.2ns,
I_TLP and V_TLP averaging window:
30 uClamp0571P
uClamp1271P
t₁ = 70ns to t₂ = 90ns
uClamp1571P
uClamp2271P
4
25
uClamp3671P
3
20
15
2
10
1
5
0
0
10 20 30 40 50 60 70 80 90
Peak Pulse Current - I_PP (A)
0
0 5 10 15 20 25 30 35 40 45 50 55
Clamping Voltage (V)
ESD Clamping - uClamp0571P
(+8kV Contact per IEC 61000-4-2)
35
UC0571P_P8_ESD
30
25
20
15
10
5
Measured with 50 Ohm scope input
impedance, 2GHz bandwidth. Corrected
0
for 50 Ohm, 20dB attenuator. ESD gun
return path connected to ESD ground plane.
-5
-10 0
10 20 30 40 50 60 70 80
Time (ns)
© 2014 Semtech Corporation
7
ESD Clamping - uClamp0571P
(-8kV Contact per IEC 61000-4-2)
15
Measured with 50 Ohm scope input
10
impedance, 2GHz bandwidth. Corrected
for 50 Ohm, 20dB attenuator. ESD gun
5
return path connected to ESD ground plane.
0
-5
-10
-15
-20
-25
-30
-35
-10 0
UC0571P_AR_N8_ESD
10 20 30 40 50 60 70 80
Time (ns)
www.semtech.com