|
LS505 Datasheet, PDF (1/5 Pages) Gennum Corporation – High Gain Class A Amplifier with Peak Clipping | |||
|
FEATURES
⢠72 dB typical gain
⢠0.2 to 2.0 mA of transducer current adjustment
⢠43 dB range of feedback volume control
⢠1.0 to 1.6 V supply operating range
⢠Schottky diodes provide symmetrical peak clipping
⢠requires only 4 external parts for operation
STANDARD PACKAGING
⢠8 pin MINIpac
⢠8 pin MICROpac
⢠8 pin PLID®
⢠8 pin SLT
⢠Chip (56 x 55 mils)
High Gain Class A Amplifier
with Peak Clipping
LS505 DATA SHEET
DESCRIPTION
The LS505 is a low voltage, monolithic integrated circuit
amplifier comprised of an operational amplifier driving a
single transistor Class A output stage with open collector.
Also included are a pair of complementary Schottky diodes
which provide the capability for symmetrical peak clipping in
a feedback configuration.
An internal negative feedback loop ensures a stable operating
point for the output stage over the designed operating voltage.
This also permits trimming of the output current with the use
of a single external resistor.
The input stage and microphone are biased by an internal
2.2 k⦠decoupling resistor to increase battery line signal
rejection.
VMIC
VB
8
4
MPO
1
I/P
6
100
RVC
5
2.2k
+
-
33k
200
7
2
GND
RE
BLOCK DIAGRAM
All resistors in ohms, all capacitors in farads unless otherwise stated.
O/P
3
Revision Date: January 1996
Document No. 500 - 20 - 11
GENNUM CORPORATION P.O. Box 489, Stn A, Burlington, Ontario, Canada L7R 3Y3 tel. (905) 632-2996 fax: (905) 632-5946
Japan Branch: A-302, M i yamae Vi l l age, 2â10â42 M i yamae, Suginamiâku Tokyo 168, Japan tel. (03) 3334-7700 fax (03) 3247-8839
|
▷ |