GS9028_04 Datasheet, PDF (1/7 Pages) Gennum Corporation – Cable Driver with Two Adjustable Outputs

GENLINX ^™II GS9028 Cable Driver
with Two Adjustable Outputs
FEATURES
• SMPTE 259M compliant
• two complementary outputs, adjustable from 50 to
1000mVp-p into 75Ω loads
• operational from DC to 622Mb/s
• nominal 470ps rise and fall times
• < ±7% output amplitude control
• 45% system power reduction over the GS9008
• no external pulldown resistors required
• input hysteresis
• operational down to 80mV input amplitude
• operates from a single +5 or -5 volt supply
• 8 pin SOIC
• Pb-free and Green
APPLICATIONS
4ƒsc, 4:2:2, and 4:4:4:4 serial digital video interfaces from
143Mb/s to 540Mb/s; general purpose high speed cable
driver applications.
DESCRIPTION
DATA SHEET
The GS9028 is a second generation bipolar integrated
circuit designed to drive two 75Ω co-axial cables.
The GS9028 features two complementary outputs whose
amplitude is controlled within ± 7%. The output signal levels
are also adjustable from as low as 50mV to as high as
1000mV with little change in other performance parameters.
The output amplitude of the output stage is varied by
adjusting the R_SET resistor value.
The GS9028 consumes 45% less system power than the
GS9008 and does not require external pulldown resistors
resulting in a smaller PCB footprint. Operational with input
amplitudes as low as 80mV, the GS9028 is a robust serial
interface device.
The GS9028 is packaged in an 8 pin SOIC and operates
from a single +5 or -5 volt supply.
ORDERING INFORMATION
PART NUMBER
GS9028-CKA
GS9028-CTA
GS9028-CKAE3
GS9028-CTAE3
PACKAGE
8 pin SOIC
8 pin SOIC Tape
8 pin SOIC
8 pin SOIC Tape
TEMPERATURE
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
Pb-FREE AND GREEN
No
No
Yes
Yes
BANDGAP REFERENCE AND BIASING CIRCUIT
R_SET
SDI
INPUT
DIFFERENTIAL
PAIR WITH
SDI
HYSTERESIS
OUTPUT STAGE
& RISE/FALL TIME
CONTROL CIRCUIT
SDO
SDO
Revision Date: June 2004
BLOCK DIAGRAM
Document No. 521 - 68 - 05
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Tel. [phone] Fax. [phone] E-mail: [e-mail]
www.gennum.com