GS9007A Datasheet, PDF (1/4 Pages) Gennum Corporation – Quad Serial Digital Cable Driver

FEATURES
• two output pairs (four outputs total) meeting
SMPTE 259M
• nominal 550 ps rise and fall times
• accepts SMPTE and standard ECL input levels
• operates from a single +5 or -5 volt supply
• on-chip DC restoration for low jitter
• 250mW power dissipation
• Pb-free and Green
APPLICATIONS
• 4ƒ_SC, 4:2:2 and 360Mb/s Serial Digital Interfaces.
GENLINX ^™ GS9007A
Quad Serial Digital Cable Driver
DATA SHEET
The GENLINX ™ GS9007A is a bipolar intergrated circuit
designed to drive four 75Ω co-axial cables with SMPTE
level serial digital video signals at data rates up to 360Mb/s.
It directly interfaces with other GENLINX ™ devices and
can also be used as a general purpose high speed cable
driver.
The differential inputs are AC-coupled and internally
DC-restored wich allows correct passage of pathological
check codes associated with the serial digital standards.
Even though the inputs are AC-coupled, static protection
diodes at each input restrict the DC differential so that if the
driving source uses the opposite polarity power supply,
external DC blocking capacitors must be used.
The GS9007A is packaged in an 8 pin SOIC, and operates
from a single +5 or -5 volt supply consuming typically only
250mW of power.
ORDERING INFORMATION
PART NUMBER
GS9007ACKA
GS9007ACKAE3
PACKAGE TYPE
8 Pin SOIC
8 Pin SOIC
TEMPERATURE RANGE
0°C to 70°C
0°C to 70°C
Pb-FREE AND GREEN
No
Yes
SERIAL ₇
INPUT
SERIAL 6
INPUT
GS9007A
INPUT
BUFFER
& DC
RESTORE
RISE
TIME
CONTROL
FUNCTIONAL BLOCK DIAGRAM
8
VCC (GND)
1
SDO1
2
SDO1
3
SDO2
4
SDO2
5
GND (VEE)
Revision Date: June 2005
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Tel. [phone] Fax. [phone] E-mail: [e-mail]
www.gennum.com
Document No. 24009 - 2