GS9004C Datasheet, PDF (1/5 Pages) Gennum Corporation – Serial Digital Cable Equalizer

GENLINX^™ GS9004C
Serial Digital Cable Equalizer
DATA SHEET
FEATURES
• automatic cable equalization
• typically greater than 350 m of high quality cable at
270 Mb/s
• typically 300 m of high quality cable at 360 Mb/s
• improved jitter response vs cable length
• drop in replacement for GS9004B
• capability to drive 50 Ω loads (to V_TT)
• fully compatible with SMPTE 259M and operational to
400 Mb/s
• signal strength indicator
• output 'eye' monitor
• 14 pin SOIC packaging
• single +5 or -5 volt power supply operation
APPLICATIONS
• Front-end cable equalization for digital video systems
• Input equalization for serial digital distribution amplifiers,
routers, production switchers and other receiving
equipment
ORDERING INFORMATION
Part Number
Package Type
GS9004CCKB
GS9004CCTB
14 pin SOIC
14 pin SOIC Tape
Temperature Range
0^oC to 70^oC
0^oC to 70^oC
DEVICE DESCRIPTION
The Gennum GS9004C is an improved monolithic automatic
cable equalizer developed for SMPTE/EBU scrambled
NRZI Serial Di g i t a l Video signals.
While there are no plans to discontinue the GS9004C,
Gennum has developed a successor product with improved
features and performance called the GS9024. The GS9024
is recommended for new designs.
This device features DC restoration to pass the Pathological
Test Signals and fully automatic equalization in order to
meet the SMPTE 259M Serial Interface Standard. The
DATA and DATA outputs typically deliver 800 mV (p-p)
equalized signals into 50 Ω loads (to V_TT). These signals
can be used to feed cable driver circuits for Serial Distribution
Amplifier applications.
This device also incorporates an analog signal strength
indicator (SSI) which provides a 0.5 V to 0 V output relative
to V_CC, indicating the amount of equalization being applied
to the signal.
The GS9004C features an OUTPUT 'EYE' MONITOR
(OEM), which allows verification of signal integrity after
equalization, prior to reslicing. Operating with a single +5
or -5 volt supply, the GS9004C typically draws 52 mA of
current.
6
SIGNAL
STRENGTH
INDICATOR
IN+ ⁸
IN- ⁹
FILTER
CONTROL
VOLTAGE
VARIABLE
FILTER
PEAK
DETECTOR
GS9004C
AGC
7 ^CAPACITOR
LOGIC
COMPARATOR
14
DATA
DC
Σ
RESTORER
13 _DATA
3 OUTPUT 'EYE'
MONITOR
FUNCTIONAL BLOCK DIAGRAM
Document No. 521 - 72 - 00
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 tel. [phone] fax. [phone]
Web Site: www.gennum.com E-mail: [e-mail]