|
GS1528A Datasheet, PDF (1/16 Pages) Gennum Corporation – GS1528A / GS9068A HD-LINX-R II Multi-Rate Dual Slew-Rate Cable Driver | |||
|
GS1528A / GS9068A HD-LINX® II
Multi-Rate Dual Slew-Rate Cable Driver
GS1528A / GS9068A Data Sheet
Features
GS1528A
⢠SMPTE 292M, SMPTE 344M and SMPTE 259M
compliant
⢠Dual coaxial cable driving outputs with selectable
slew rate
⢠50Ω differential PECL input
⢠Pb-free and RoHS compliant
⢠Pin compatible with GS9068A HD-LINX II SD SDI
cable driver
⢠Seamless interface to other HD-LINX II family
products
⢠Single 3.3V power supply operation
⢠Operating temperature range: 0°C to 70°C
GS9068A
⢠SMPTE 259M and SMPTE 344M compliant
⢠Dual coaxial cable driving outputs
⢠50Ω differential PECL input
⢠Pb-free and RoHS compliant
⢠Pin compatible with GS1528A HD-LINX II multirate
SDI dual slew-rate cable driver
⢠Seamless interface to other HD-LINX II family
products
⢠Single 3.3V power supply operation
⢠Operating temperature range: 0°C to 70°C
Applications
GS1528A
⢠SMPTE 292M, SMPTE 344M and SMPTE 259M
Coaxial Cable Serial Digital Interfaces.
GS9068A
⢠SMPTE 259M and SMPTE 344M Coaxial Cable
Serial Digital Interfaces.
Description
The GS1528A/9068A is a second generation
high-speed BiCMOS integrated circuit designed to drive
one or two 75Ω co-axial cables.
The GS1528A may drive data rates up to 1.485Gb/s
and provides two selectable slew rates in order to
achieve compliance to SMPTE 259M, SMPTE 344M
and SMPTE 292M.
The GS9068A may drive data rates up to 540Mb/s and
will achieve compliance to SMPTE 259M and SMPTE
344M.
The GS1528A/9068A accepts a LVPECL level
differential input that may be AC coupled. External
biasing resistors at the inputs are not required.
Power consumption is typically 168mW using a 3.3V
power supply.
The GS1528A/9068A is Pb-free, and the encapsulation
compound does not contain halogenated flame
retardant.
This component and all homogeneous subcomponents
are RoHS compliant.
30953 - 4 January 2006
1 of 16
www.gennum.com
|
▷ |