|
GS1508_10 Datasheet, PDF (1/14 Pages) Gennum Corporation – HDTV Cable Driver | |||
|
GS1508 HD-LINX⢠HDTV Cable Driver
Features
⢠SMPTE 292M compliant
⢠Dual cable driving outputs optimized for driving data
up to 1.485Gb/s
⢠±7% tolerance output
⢠>17dB output return loss
⢠Minimum external components
⢠Seamless interface with the HD-LINX⢠family of
products
⢠Low-power
⢠Standard packaging
⢠Pb-free and Green
Applicatons
⢠1.485Gb/s HDTV Serial Digital Receiver Interfaces for:
Routers, Distribution Amplifiers, Switchers, and other
transmitting equipment
Description
The GS1508 is a first generation very high-speed bipolar
integrated circuit designed to drive two 75Ω co-axial
cables. The GS1508 is a SMPTE 292M compliant cable
driver that directly interfaces with other Gennum HDTV
devices and can also be used as a general purpose
high-speed cable driver.
The GS1508 features two complementary outputs, with
amplitudes controlled within a precise ±7% variation. The
output amplitude can be varied by adjusting the RSET
resistor value.
The serial inputs can be AC-coupled. The GS1508 is a
low-power device that does not require external pull-down
resistors. The GS1508 is packaged in an 8-pin SOIC, and
operates from a single 5V power supply.
Bandgap Reference
and Biasing Circuit
RSET
SDI
Input
Differential
SDI
Pair
Output Stage
and Control
Patent Pending
Figure A: Block Diagram
SDO
SDO
GS1508 HD-LINX⢠HDTV Cable Driver
Data Sheet
9500 - 6
August 2010
www.gennum.com
1 of 14
|
▷ |