8052P Datasheet, PDF (1/9 Pages) Gennum Corporation – Low ESD Clamping Voltage

EClamp8052P
PROTECTION PRODUCTS
EMIClamp®
2-Line Common Mode Filter
and Low Capacitance ESD Protection
Description
EClamp®8052P integrates common mode filtering
with low capacitance ESD protection and is designed
specifically for MIPI, MHL, and USB interfaces.Each
device provides filtering and ESD protection for one
high-speed differential pair.
EClamp8052P is an easily implemented solution for
replacing discrete common mode chokes and ESD
protection devices in a single package. These devices
utilize silicon avalanche technology for superior ESD
and TLP clamping performance.They feature high
maximum ESD withstand voltage of +/- 25kV contact,
+/-30kV air discharge per IEC 61000-4-2.The integrated
common-mode choke has a typical differential mode
cutoff frequency >3GHZ and typical common mode
suppression of 10dB at 500MHz and 15dB from 1GHz
to 2.8GHz.Each channel series resistance is 1.8 Ohms
maximum.
EClamp8052P is in a 7-pin SGP1917N5 package,
measuring 1.9 x 1.7mm with a nominal height of
0.55mm.The leads have a nominal pin-to-pin pitch of
0.50mm.Flow- through package design simplifies PCB
layout and maintains signal integrity on high-speed lines.
Circuit Diagram
Features
• Transient Protection to
ŒŒ IEC 61000-4-2 (ESD) 30kV (Air), 25kV (Contact)
ŒŒ IEC 61000-4-4 (EFT) 4kV (5/50ns)
ŒŒ IEC 61000-4-5 (Lightning) 6A (8/20µs)
ŒŒ ISO-10605 (ESD) 30kV (Air), 25kV (Contact)
• Qualified to AEC-Q100, Grade 1
• Package design optimized for high speed lines
• ESD protection and common mode filtering for two
high-speed lines
• High differential bandwidth cutoff frequency
• Low ESD Clamping Voltage
• Dynamic Resistance: 0.50 Ohms (Typ)
• Solid-State Silicon-Avalanche Technology
Mechanical Characteristics
• SGP1917N5 package
• Pb-Free, Halogen Free, RoHS/WEEE Compliant
• Nominal Dimensions: 1.9 x 1.70 x 0.55 mm
• Molding Compound Flammability Rating: UL 94V-0
• Marking : Marking Code + Date Code
• Packaging : Tape and Reel
Applications
• Automotive Applications
• Industrial Equipment
• USB 2.0 / USB 3.0
• HDMI / MHL
• MIPI Camera Serial Interface (CSI)
• MIPI Display Serial Interface (DSI)
Pin Configuration
I/O+ In
I/O- In
GND
I/O+ Out
I/O- Out
I/O+ In ₁
I/O- In
I/O+ Out
I/O- Out
GND
EClamp8052P
Final Datasheet
May 7, 2015
Rev 4.0
www.semtech.com
Page 1
Semtech