|
3324T Datasheet, PDF (1/10 Pages) Gennum Corporation – Protects four high-speed lines | |||
|
PROTECTION PRODUCTS - RailClamp®
Description
The RClamp®3324T provides ESD protection for
USB3.0, HDMI1.3/1.4, and other high-speed ports. It
features a high maximum ESD withstand voltage of
±25kV contact and ±30kV air discharge per IEC
61000-4-2. RClamp3324T is designed to minimize
both the ESD peak clamping and the TLP clamping.
Peak ESD clamping voltage is extremely low and
approximately the same at each pin. The dynamic
resistance is among the industryâs lowest at 0.35
Ohms (typical). Typical capacitance on each line to
ground is approximately 0.40pF. This allows the
RClamp3324T to be used in applications operating in
excess of 5GHz without signal attenuation. These
devices are manufactured using Semtechâs proprietary
low voltage EPD technology for superior characteritics
at operating voltages up to 3.3 volts. Each device will
protect up to four lines (two high-speed pairs).
The RClamp3324T is in a 6-pin SLP1710P4T package. It
measures 1.7 x 1.0mm with a nominal height of 0.40mm.
The leads have a nominal pin-to-pin pitch of 0.40mm.
The flow- through package design simplifies PCB layout
and maintains signal integrity on high-speed lines.
The combination of low peak ESD clamping, low dynamic
resistance, and innovative package design enables this
device provides the highest level of ESD protection for
applications such as USB 3.0, HDMI and V-By-One inter-
faces.
RClamp3324T
Low Voltage RailClamp®
4-Line ESD Protection
PRELIMINARY
Features
ïµ ESD protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±30kV (air), ±25kV (contact)
IEC 61000-4-5 (Lightning) 5A (8/20μs)
IEC 61000-4-4 (EFT) 40A (5/50ns)
ïµ Flow-Through design
ïµ Protects four high-speed lines
ïµ Low capacitance: 0.40pF typical (I/O to ground)
ïµ Low ESD clamping voltage
ïµ Extremely low dynamic resistance: 0.35 Ohms (Typ)
ïµ Solid-state silicon-avalanche technology
Mechanical Characteristics
ïµ SLP1710P4T 6L package
ïµ Pb-Free, Halogen Free, RoHS/WEEE Compliant
ïµ Nominal Dimensions: 1.7 x 1.0 x 0.40 mm
ïµ Lead Finish: NiPdAu
ïµ Molding compound flammability rating: UL 94V-0
ïµ Marking : Marking code + date code
ïµ Packaging : Tape and Reel
Applications
ïµ USB 3.0
ïµ HDMI 1.3/1.4
ïµ 10GBase-T Ethernet
ïµ V-By-One
ïµ Display Port
ïµ MHL
ïµ LVDS Interfaces
ïµ eSATA Interfaces
Circuit Diagram
Pin Configuration (Top View)
Pin 1
Pin 2
Pin 3
Pin 4
5, 6
I/O 1 1
I/O 2
I/O 3
I/O 4
GND
GND
Revision 9/24/2014
1
www.semtech.com
|
▷ |