GL860A Datasheet, PDF (8/42 Pages) GENESYS LOGIC – USB 2.0 UVC Camera Controller

GL860A USB 2.0 UVC Camera Controller
CHAPTER 2 FEATURES
USB specification compliance
- Complies with 480Mbps Universal Serial Bus specification rev. 2.0.
- Complies with 12Mbps Universal Serial Bus specification rev. 2.0.
- Support USB 2.0 Isochronous Video pipe to 24MB/s.
Sensor interface
- Programmable interface for popular general CCD module/CMOS sensor
Non-process video streaming (USB High-speed connection)
Support 4 USB endpoints
- Endpoint 0: Control PIPE.
- Endpoint 1: Isochronous/Bulk data in (configurable).
- Endpoint 2: Interrupt OUT.
- Endpoint 3: Interrupt IN.
Embedded 8052 micro-controller
- Operate @ 15 MHz clock.
- 8K ROM.
Support USB remote wakeup..
3.3V/1.8V operation.
3.3V to 1.8V regulator is built-in.
Capability to support on-line download program
Available in 100-pin QFP and 48-pin LQFP package.
Pass WHQL (Windows Hardware Quality Lab)
Pass USB-IF (USB Implementers Forum) test
－ Application NB Cam, PC Cam, UMPC, Game Console
－ Support OS XP, Vista, MCE, XP64, Win2K
USB Video Class V1.1 compliant
- The sensor, UVC, property control setting stored in external EEPROM (24Cxxx). (<= 8K bytes)
- Support alternative proprietary driver to enhance image performance.
- Non-UVC mode (Non-EEPROM), worked with proprietary driver
Support YUV/RGB/I420 format
： Video stream up to 12 fps in UXGA, 15 fps in SXGA, 30 fps in VGA
- UVC Class mode (External EEPROM), worked with OS native driver
Support UVC uncompressed YUY2 format
： Video stream up to 6 fps in UXGA, 9 fps in SXGA, 30 fps in VGA
- Still image captured up to UXGA
©2007 GenesysLogic, Inc. - All rights reserved.
Page 8