01771.35.01 Datasheet, PDF (1/1 Pages) General Cable Technologies Corporation – Carolprene® Welding Cable

Cord & Cordset
Carolprene^® Welding Cable
90ºC 600 Volt
NOWITEARMSETDOCK
Industrial Cord
CAROLPRENE^® WELDING CABLE – 600 VOLT – CLASS K – 30 AWG STRANDING
CATALOG
AWG OR CONDUCTOR
NOMINAL O.D.
APPROX.
NET WT.
STD.
NUMBER
kcmil
STRAND
INCHES
mm
LBS/M'^(S)
CTN.
01778
6
259/30
0.380
9.65
135
250'
01777
4
374/30
0.400
10.16
172
250'
01776
2
625/30
0.465
11.81
260
250'
01775
1
778/30
0.495
12.57
317
250'
01774
1/0
990/30
0.560
14.22
400
250'
01773
2/0
1248/30
0.615
15.62
487
250'
01772
3/0
1586/30
0.670
17.02
605
250'
01771
4/0
2054/30
0.750
19.05
827
250'
99142* 250 kcmil
2496/30
0.830
21.08
976
250'
99432* 350 kcmil
3432/30
0.960
24.38
1338
250'
99202* 500 kcmil
5054/30
1.200
30.48
1995
250'
(S) _{A ctual shipping weight may vary.}
* Non-stock item, minimum quantity required.
WELDING CABLE AMPACITIES
SINGLE CONDUCTOR
Required Cable Sizes: For Welding Cable Application
AMPS
100
150
200
250
300
350
400
450
500
550
600
length in feet for total circuit for secondary voltages only – do not use this table for 600 Volt in-line applications
100'
150'
200'
250'
300'
350'
400'
4
4
2
2
1
1/0
1/0
4
2
1
1/0
2/0
3/0
3/0
2
1
1/0
2/0
3/0
4/0
4/0
1
1/0
2/0
3/0
4/0
1/0
2/0
3/0
4/0
1/0
3/0
4/0
2/0
3/0
2/0
4/0
3/0
4/0
3/0
4/0
4/0
REQUIRED CABLE SIZES SHOWN IN AWG NUMBERS
The total circuit length includes both welding and ground leads (based on 4-volt drop) 60% duty cycle.
These values for current-carrying capacity are based on a copper temperature of 60°C (140°F), an ambient temperature
of 40°C (104°F) and yield load factors from approximately 32% for the No. 2 AWG cable to approximately 23% for
the No. 3/0 AWG cable, and higher for the smaller sizes. The sizes of cables generally used range from No. 2 AWG to
No. 3/0 AWG. In actual service, the load factor may be much higher than indicated without overheating the cable, as the
ambient temperature will generally be substantially lower than 40°C.
Product Construction:
Conductor:
• 6 AWG through 500 kcmil fully annealed
stranded bare copper Class K
Jacket:
•  Premium-grade 90ºC EPDM, black or red
• Temperature range: -40ºC to +90ºC
Jacket Marking:
• CAROLPRENE (SIZE) WELDING CABLE 600
VOLT MADE IN USA
Applications:
• Secondary voltage resistance welding leads
• Power supply applications not exceeding
600 volts AC
Features:
•  Good flexibility
• Abrasion-resistant
• Good color retention
Packaging:
• 250' (76.2 m), 500' (152.4 m), and 1000'
(304.8 m) reels
• MCM sizes cut to length
• Other put-ups available on special order
Industry Approvals:
•  RoHS Compliant
Suggested Ampacities:
For 600 Volt In-Line Applications
AWG OR kcmil AMPERES AWG
500 kcmil
695
1/0
350 kcmil
552
1
250 kcmil
445
2
4/0
310
4
3/0
265
6
2/0
223
Ampacities for portable cable, continuous-duty
(ambient temperature of 40°C).
May not be suitable for all installations per
National Electrical Code^®.
AMPERES
190
160
140
100
75
Ordering Part Number Example
01771.38.03
4/0 500' put-up in red
.03 for red jacket
34