UGB10ACT Datasheet, PDF (1/2 Pages) General Semiconductor – ULTRAFAST SOFT RECOVERY RECTIFIER

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
UGB10ACT THRU UGB10DCT
ULTRAFAST SOFT RECOVERY RECTIFIER
Reverse Voltage - 50 to 200 Volts Forward Current - 10.0 Amperes
0.320 (8.13)
0.360 (9.14)
SEATING _-T-
PLATE
0.095 (2.41)
0.100 (2.54)
TO-263AB
0.380 (9.65)
0.420 (10.67)
0.245 (6.22)
MIN
K
1K2
0.575 (14.60)
0.625 (15.88)
0.160 (4.06)
0.190 (4.83)
0.045 (1.14)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.027 (0.686)
0.037 (0.940)
0.090 (2.29)
0.110 (2.79)
0.018 (0.46)
0.025 (0.64)
0.080 (2.03)
0.110 (2.79)
PIN 1
PIN 2
K - HEATSINK
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
♦ Ideally suited for free wheeling diode power factor
correction applications
♦ Soft recovery characteristics
♦ Excellent high temperature switching
♦ Optimized to reduce switching losses
♦ High temperature soldering in accordance with
CECC 802 / Reflow guaranteed
♦ Glass passivated chip junction
MECHANICAL DATA
Case: JEDEC TO-263AB molded plastic body
Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current at TC=100°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) per leg
SYMBOLS UGB10ACT UGB10BCT UGB10CCT UGB10DCT UNITS
VRRM
50
100
150
200 Volts
VRWM
50
100
150
200 Volts
VRMS
35
70
105
140 Volts
VDC
50
100
150
200 Volts
I(AV)
10
Amps
IFSM
60
Amps
Maximum instantaneous forward voltage per leg at IF=10A, TJ=25°C
IF=5A, TJ=25°C
VF
IF=5A, TJ=150°C
Maximum reverse leakage current per leg
at working peak reverse voltage
TJ=25°C
TJ=100°C
IR
Maximum reverse recovery time per leg at
IF=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 IRM
trr
Maximum reverse recovery time per leg at
IF=0.5A, IR=1.0A, Irr=0.25A
Maximum
Typical
trr
Maximum reverse recovery current per leg at
IF=5A, di/dt=50A/µs,VR=30V
IRM
Maximum stored charge per leg
IF=2A, di/dt=20A/µs, VR=30V Irr=0.1 IRM
Maximum
Typical
Qrr
1.25
1.10
0.895
10
200
25
25
15
0.7
5.5
4.5
Volts
µA
ns
ns
Amps
nC
Typical thermal resistance from junction to case per leg
Operating junction and storage temperature range
RΘJC
TJ, TSTG
4.5
-40 to +150
°C/W
°C
4/98