UG10FCT Datasheet, PDF (1/2 Pages) General Semiconductor – ULTRAFAST SOFT RECOVERY RECTIFIER

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
UG10FCT AND UG10GCT
ULTRAFAST SOFT RECOVERY RECTIFIER
Reverse Voltage - 400 Volts Forward Current - 10.0 Amperes
0.160 (4.06)
0.140 (3.56)
TO-220AB
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1
23
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.35)
PIN 1
PIN 3
Dimensions in inches and (millimeters)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
PIN 2
CASE
FEATURES
♦ Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
♦ Ideally suited for free wheeling diode power factor
correction applications
♦ Soft recovery characteristics
♦ Excellent high temperature switching
♦ Optimized to reduce switching losses
♦ High temperature soldering guaranteed:
250°C/10 seconds at terminals
♦ Glass passivated chip junction
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body
Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current at TC=100°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) per leg
SYMBOLS
VRRM
VRWM
VRMS
VDC
I(AV)
IFSM
UG10FCT
300
225
UG10GCT
400
300
210
280
300
400
10
60A
Maximum instantaneous forward voltage per leg
(NOTE 1)
IF= 5A
TJ=25°C
TJ=150°C
VF
Maximum reverse leakage current
at working peak reverse voltage
TJ=25°C
TJ=100°C
IR
Maximum reverse recovery time per leg at IF=0.5A, IR=1.0A, Irr=0.25A
trr
Maximum Reverse recovery time per leg at
IF=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 IRM
trr
Maximum reverse recovery current per leg at
IF=5A, di/dt=50A/µs,VR=30V
TC=100°C
IRM
1.30
1.05
10
200
35
50
3.0
Maximum stored charge per leg
IF=2A, di/dt=20A/µs, VR=30V, Irr=0.1 IRM
Typical thermal resistance from junction to case per leg
Operating junction and storage temperature range
Qrr
RΘJC
TJ, TSTG
50
4.5
-40 to +150
UNITS
Volts
Volts
Volts
Volts
Amps
Amps
Volts
µA
ns
ns
Amps
nC
°C/W
°C
NOTE: (1) Pulse test: 300µs pulse width, 1% duty cycle
NOTICE: Advanced product information is subject to change without notice
10/1/98