UG10ACT Datasheet, PDF (1/2 Pages) General Semiconductor – ULTRAFAST SOFT RECOVERY RECTIFIER

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
UG10ACT THRU UG10DCT
ULTRAFAST SOFT RECOVERY RECTIFIER
Reverse Voltage - 200 Volts Forward Current - 10.0 Amperes
0.160 (4.06)
0.140 (3.56)
TO-220AB
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1
23
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.35)
PIN 1
PIN 3
Dimensions in inches and (millimeters)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
PIN 2
CASE
FEATURES
♦ Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
♦ Ideally suited for free wheeling diode power factor
correction applications
♦ Soft recovery characteristics
♦ Excellent high temperature switching
♦ Optimized to reduce switching losses
♦ High temperature soldering guaranteed:
250°C/10 seconds at terminals
♦ Glass passivated chip junction
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body
Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Working peak reverse voltage
SYMBOLS UG10ACT UG10BCT UG10CCT UG10DCT
VRRM
50
100
150
200
VRWM
50
100
150
200
UNITS
Volts
Volts
Maximum RMS voltage
VRMS
35
70
105 140 Volts
Maximum DC blocking voltage
Maximum average forward rectified current at TC=100°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) per leg
VDC
50
100
150
200 Volts
I(AV)
10
Amps
IFSM
60
Amps
Maximum instantaneous forward voltage per leg at IF=10A, TJ=25°C
IF=5A, TJ=25°C
VF
IF=5A, TJ=150°C
1.25
1.10
0.895
Volts
Maximum reverse leakage current per leg
at working peak reverse voltage
Maximum reverse recovery time per leg at
IF=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 IRM
Maximum reverse recovery time per leg at
IF=0.5A, IR=1.0A, Irr=0.25A
TJ=25°C
TJ=100°C
IR
trr
Maximum
Typical
trr
10
200
µA
25
ns
25
15
ns
Maximum reverse recovery current per leg at
IF=5A, di/dt=50A/µs,VR=30V
Maximum stored charge per leg
IF=2A, di/dt=20A/µs, VR=30V Irr=0.1 IRM
Typical thermal resistance from junction to case per leg
Operating junction and storage temperature range
Maximum
Typical
IRM
Qrr
RΘJC
TJ, TSTG
0.7
5.5
4.5
4.5
-40 to +150
Amps
nC
°C/W
°C
NOTICE: Advanced product information is subject to change without notice
4/98