UG06A Datasheet, PDF (1/2 Pages) General Semiconductor – MINIATURE ULTRAFAST EFFICIENT PLASTIC RECTIFIER

UG06A THRU UG06D
MINIATURE ULTRAFAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts Forward Current - 0.6 Ampere
Case Style MPG06
0.100 (2.54)
0.090 (2.29)
DIA
0.025 (0.635)
0.023 (0.584)
DIA.
1.0 (25.4)
MIN.
0.125 (3.18)
0.115 (2.92)
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
♦ Ideally suited for use in very high frequency switching
power supplies, inverters and as a free wheeling diode
♦ Ultrafast reverse
recovery times for high efficiency
♦ Soft recovery characteristics
♦ Excellent high temperature switching
♦ Glass passivated junction
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Void free molded plastic body over passivated chip
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
WeIght: 0.0064 ounce, 0.181 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
Maximum repetitive peak reverse voltage
VRRM
Maximum RMS voltage
VRMS
Maximum DC blocking voltage
VDC
Maximum average forward rectified current
0.375" (9.5mm) lead length at TL=75°C
I(AV)
Peak forward surge current
8.3 ms single half sine-wave superimposed
on rated load (JEDEC Method) at TL=75°C
IFSM
Maximum instantaneous forward voltage at 0.6A
VF
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
IR
Maximum reverse recovery time (NOTE 1)
trr
Maximum reverse recovery time
(NOTE 2)
TJ=25°C
TJ=100°C
trr
Maximum recovered stored charge
(NOTE 2)
TJ=25°C
TJ=100°C
Qrr
Typical junction capacitance (NOTE 3)
CJ
Typical thermal resistance (NOTE 4)
RΘJA
RΘJL
Operating junction and storage temperature range
TJ, TSTG
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A,Irr=0.25A
(2) trr and Qrr measured at IF=0.6A: VR=30V, di/dt=50A/µs, Irr=10% IRM for meaurement of trr
(3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(4) Thermal resistance from junction to ambient and junction to lead at 0.375" (9.5mm) lead length
P.C.B. mounted with 0.2 x 0.2” (5.0 x 5.0mm) copper pads
UG06A
50
35
50
UG06B
100
70
100
UG06C
150
105
150
UG06D
200
140
200
UNITS
Volts
Volts
Volts
0.6
Amp
40.0
0.95
5.0
100.0
15.0
25.0
35.0
8.0
20.0
9.0
97.0
28.0
-55 to +150
Amps
Volts
µA
ns
ns
nC
pF
°C/W
°C
4/98