UF5400 Datasheet, PDF (1/2 Pages) Jinan Gude Electronic Device – 3.0 AMP. ULTRA FAST RECTIFIERS

UF5400 THRU UF5408
ULTRAFAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes
DO-201AD
0.210 (5.3)
0.190 (4.8)
DIA.
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated chip junction
♦ Low cost
♦ Ultrafast recovery
time for high efficiency
♦ Low forward voltage,
high current capability
♦ Low leakage
♦ High surge capability
♦ High temperature soldering guaranteed:
250°C, 0.375" (9.5mm) lead length for 10 seconds,
5 lbs. (2.3 kg) tension
MECHANICAL DATA
Case: JEDEC DO-201AD, molded plastic body over
passivated chip
Terminals: Plated axial leads solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current,
0.375" (9.5mm) lead length at TA=55°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TA=55°C
Maximum instantaneous forward voltage at 3.0A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
Maximum reverse recovery time (NOTE 1) TJ=25°C
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
SYMBOLS UF5400 UF5401 UF5402 UF5403 UF5404 UF5405 UF5406 UF5407 UF5408 UNITS
VRRM 50 100 200 300 400 500 600 800 1000 Volts
VRMS 35 70 140 210 280 350 420 560 700 Volts
VDC 50 100 200 300 400 500 600 800 1000 Volts
I(AV)
3.0
Amps
IFSM
VF
IR
trr
CJ
RΘJA
RΘJL
TJ, TSTG
150.0
1.0
10.0
75.0
50.0
45.0
20.0
8.5
-55 to +150
1.7
200.0
75.0
36.0
Amps
Volts
µA
ns
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measure at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to lead and from junction to ambient with 0.375" (9.5mm) lead length,
both leads attached to heatsink
9/2/98