SRP300A Datasheet, PDF (1/2 Pages) General Semiconductor – FAST SWITCHING PLASTIC RECTIFIER

SRP300A THRU SRP300K
FAST SWITCHING PLASTIC RECTIFIER
Reverse Voltage - 50 to 800 Volts Forward Current - 3.0 Amperes
DO-201AD
0.210 (5.3)
0.190 (4.8)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ High surge current capability
♦ Construction utilizing void-free
molded plastic technique
♦ 3.0 Ampere operation at
TA=55°C with no thermal runaway
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
Dimensions are in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC DO-204AD molded plastic body
Terminals: Plated axial leads solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method) at TA=55°C
Maximum instantaneous forward voltage at 3.0A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction temperature range
Storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
SRP
300A
50
35
50
SRP
300B
100
70
100
SRP
300D
200
140
200
3.0
SRP
300G
SRP
300J
400 600
280 420
400 600
SRP
300K
800
560
800
UNITS
Volts
Volts
Volts
Amps
IFSM
VF
IR
trr
CJ
RΘJA
TJ
TSTG
150.0
Amps
1.3
Volts
10.0
200
300 400
500 ^µA
100 100
150
150
200
200 ns
28.0
pF
22.0
°C/W
-50 to +125
°C
-50 to +150
°C
NOTES:
(1) Reverse recovery test conditions:IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length with both leads equally heat sink
4/98