SD241P Datasheet, PDF (1/2 Pages) General Semiconductor – SCHOTTKY RECTIFIER

SD241P
SCHOTTKY RECTIFIER
Reverse Voltage - 45 Volts Forward Current - 30.0 Amperes
TO-247AD
0.245 (6.2)
0.225 (5.7)
0.645 (16.4)
0.625 (15.9)
0.840 (21.3)
0.820 (20.8)
0.323 (8.2)
0.313 (7.9)
0.170
(4.3)
0.142 (3.6)
0.138 (3.5)
0.078 REF
(1.98)
10^o
1
2
3
0.160 (4.1)
0.140 (3.5)
0.795 (20.2)
0.775 (19.6)
0.086 (2.18)
0.076 (1.93)
0.127 (3.22)
0.117 (2.97)
1^o REF.
BOTH SIDES
0.203 (5.16)
0.193 (4.90)
30^o
10^o TYP.
BOTH SIDES
0.118 (3.0)
0.108 (2.7)
0.225 (5.7)
0.205 (5.2)
0.048 (1.22)
0.044 (1.12)
PIN 1
PIN 3
PIN 2
CASE
0.030 (0.76)
0.020 (0.51)
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Dual rectifier construction, positive center-tap
♦ Metal silicon junction, majority carrier
conduction
♦ Low power loss,
high efficiency
♦ High current capability,
low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C, 0.17" (4.3mm) from case for 10 seconds
MECHANICAL DATA
Case: JEDEC TO-247AD molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 10 in. - lbs. max.
Weight: 0.2 ounce, 5.6 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
SD241P
Maximum repetitive peak reverse voltage at TC=25°C
Maximum blocking voltage at TC=25°C
Maximum working peak reverse voltage
Maximum average forward rectified current
at TC=105°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Peak repetitive reverse surge current (NOTE 1)
Maximum instantaneous forward voltage
per leg at (NOTE 2)
Maximum instantaneous reverse current
reverse voltage per leg at VR=35V (NOTE 2)
Voltage rate of change at VR=35V
Maximum thermal resistance (NOTE 3)
Operating junction temperature range
IF=10A, TC=125°C
IF=20A, TC=125°C
TC=25°C
TC=125°C
VRRM
VDC
VRWM
I(AV)
IFSM
IRSM
VF
IR
dv/dt
RΘJC
TJ
45
45
35
30.0
400.0
2.0
0.47
0.60
1.0
100.0
10,000
1.4
-65 to +150
Storage temperature range
TSTG
-65 to +175
NOTES:
(1) 2.0µs pulse width, f=1.0 KHZ
(2) Pulse test: 300µs pulse width, 1% duty cycle
(3) Thermal resistance from junction of case per leg
UNITS
Volts
Volts
Volts
Amps
Amps
Amps
Volts
mA
V/µs
°C
°C
°C
4/98