SBLB2030CT Datasheet, PDF (1/2 Pages) General Semiconductor – SCHOTTKY RECTIFIER

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
SBLB2030CT AND SBLB2040CT
SCHOTTKY RECTIFIER
Reverse Voltage - 30 and 40 Volts Forward Current - 20.0 Amperes
TO-263AB
0.320 (8.13)
0.360 (9.14)
SEATING _-T-
PLATE
0.095 (2.41)
0.100 (2.54)
0.380 (9.65)
0.420 (10.67)
0.245 (6.22)
MIN
K
1K2
0.575 (14.60)
0.625 (15.88)
0.160 (4.06)
0.190 (4.83)
0.045 (1.14)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.027 (0.686)
0.037 (0.940)
0.090 (2.29)
0.110 (2.79)
0.018 (0.46)
0.025 (0.64)
0.080 (2.03)
0.110 (2.79)
PIN 1
PIN 2
K - HEATSINK
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Metal silicon junction,
majority carrier conduction
♦ Low power loss, high efficiency
♦ High current capability,
low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Dual rectifier construction, positive center-tap
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.17" (4.3mm) from case
MECHANICAL DATA
Case: JEDEC TO-263AB molded plastic
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs.max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TC=105°C
Peak forward surge current, 8.3ms single
half sine-wave superimposed on rated load
(JEDEC Method)
Peak repetitive reverse surge current (NOTE 3)
Maximum instantaneous forward voltage
per leg at 10.0A (NOTE 1)
Maximum instantaneous current at
TC=25°C
rated DC blocking voltage per leg (NOTE 1) TC=100°C
Typical thermal resistance per leg (NOTE 2)
Operating junction and storage temperature range
NOTES:
(1) Pulse test: 300µs pulse width, 1% duty cyle
(2) Thermal resistance from junction to case per leg
(3) 2.0µs pulse width, f=1.0 KHZ
SYMBOLS
VRRM
VRMS
VDC
I(AV)
IFSM
IRRM
VF
IR
RΘJC
TJ, TSTG
SBLB2030CT
30
21
30
SBLB2040CT
40
28
40
20.0
175.0
1.0
0.55
1.0
50.0
2.0
-40 to +125
UNITS
Volts
Volts
Volts
Amps
Amps
Amp
Volts
mA
°C/W
°C
4/98