SBLB1630CT Datasheet, PDF (1/2 Pages) General Semiconductor – SCHOTTKY RECTIFIER

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
SBLB1630CT AND SBLB1640CT
SCHOTTKY RECTIFIER
Reverse Voltage - 30 and 40 Volts Forward Current - 16.0 Amperes
0.320 (8.13)
0.360 (9.14)
SEATING _-T-
PLATE
0.095 (2.41)
0.100 (2.54)
0.380 (9.65)
0.420 (10.67)
0.245 (6.22)
MIN
K
TO-263AB
1K2
0.575 (14.60)
0.625 (15.88)
0.090 (2.29)
0.110 (2.79)
0.027 (0.686)
0.037 (0.940)
FEATURES
♦ Plastic package has Underwriters Laboratory
0.160 (4.06)
0.190 (4.83)
Flammability Classifications 94V-0
♦ Metal silicon junction, majority carrier conduction
0.045 (1.14)
0.055 (1.40)
♦ Low power loss,high efficiency
♦ High current capability,
low forward voltage drop
0.047 (1.19)
0.055 (1.40)
♦ High surge capability
♦ Guardring for overvoltage protection
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ High temperature soldering in accordance with
0.018 (0.46)
0.025 (0.64)
CECC 802 / Reflow guaranteed
0.080 (2.03)
0.110 (2.79)
PIN 1
PIN 2
K - HEATSINK
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC TO-263AB molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TC=95°C
Peak forward surge current, 8.3ms single
half sine-wave superimposed on rated load
(JEDEC Method)
Maximum instantaneous forward voltage
per leg at 8.0A (NOTE 1)
Maximum instantaneous reverse current at
rated DC blocking voltage per leg (NOTE 1)
TC=25°C
TC=100°C
Typical thermal resistance per leg (NOTE 2)
Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
SBLB1630CT
30
21
30
SBLB1640CT
40
28
40
16.0
IFSM
250.0
VF
IR
RΘJC
TJ, TSTG
0.55
0.5
50.0
3.0
-40 to +125
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
mA
°C/W
°C
NOTES:
(1) Pulse test: 300µs pulse width, 1% duty cycle
(2) Thermal resistance from junction to case per leg
4/98