SBLB1030CT Datasheet, PDF (1/2 Pages) General Semiconductor – SCHOTTKY RECTIFIER

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
SBLB1030CT AND SBLB1040CT
SCHOTTKY RECTIFIER
Reverse Voltage - 30 and 40 Volts Forward Current - 10.0 Amperes
0.320 (8.13)
0.360 (9.14)
SEATING _-T-
PLATE
0.095 (2.41)
0.100 (2.54)
0.380 (9.65)
0.420 (10.67)
0.245 (6.22)
MIN
K
TO-263AB
1K2
0.575 (14.60)
0.625 (15.88)
0.090 (2.29)
0.110 (2.79)
0.027 (0.686)
0.037 (0.940)
0.160 (4.06)
0.190 (4.83)
0.045 (1.14)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.018 (0.46)
0.025 (0.64)
0.080 (2.03)
0.110 (2.79)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Metal silicon junction, majority carrier conduction
♦ Low power loss,high efficiency
♦ High current capability,
low forward voltage drop
♦ High surge capacity
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering in accordance with
CECC 802 / Reflow guaranteed
PIN 1
PIN 2
K - HEATSINK
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC TO-263AB molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TC=95°C
Peak forward surge current, 8.3ms single
half sine-wave superimposed on rated load
(JEDEC Method)
Maximum instantaneous forward voltage
per leg at 5.0A (NOTE 1)
Maximum instantaneous reverse current at
rated DC blocking voltage (NOTE 1)
Typical thermal resistance (NOTE 2)
Operating and storage temperature range
TC=25°C
TC=100°C
SYMBOLS
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR
RΘJC
TJ, TSTG
SBLB1030CT
30
21
30
SBLB1040CT
40
28
40
10.0
175.0
0.55
0.5
50.0
3.0
-40 to +125
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
mA
°C/W
°C
NOTES:
(1) Pulse test: 300µs pulse width, 1% duty cycle
(2) Thermal resistance from junction to case per leg
4/98