SBL4030PT Datasheet, PDF (1/2 Pages) Diodes Incorporated – 40A SCHOTTKY BARRIER RECTIFIER

*NEW PRODUCT
*NEW PRODUCT
*NEW PRODUCT
SBL4030PT THRU SBL4040PT
SCHOTTKY RECTIFIER
Reverse Voltage - 30 to 40 Volts Forward Current - 40.0 Amperes
TO-247AD
0.245 (6.2)
0.225 (5.7)
0.645 (16.4)
0.625 (15.9)
0.840 (21.3)
0.820 (20.8)
0.323 (8.2)
0.313 (7.9)
0.170
(4.3)
0.142 (3.6)
0.138 (3.5)
0.078 REF
(1.98)
10^o
1
2
3
0.160 (4.1)
0.140 (3.5)
0.795 (20.2)
0.775 (19.6)
0.086 (2.18)
0.076 (1.93)
0.127 (3.22)
0.117 (2.97)
1^o REF.
BOTH SIDES
0.203 (5.16)
0.193 (4.90)
30^o
10^o TYP.
BOTH SIDES
0.118 (3.0)
0.108 (2.7)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Dual rectifier construction, positive center-tap
♦ Metal silicon rectifier,
majority carrier conduction
♦ Low power loss,
high efficiency
♦ High current capability, low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.17" (4.3mm) from case
0.225 (5.7)
0.205 (5.2)
0.048 (1.22)
0.044 (1.12)
PIN 1
PIN 3
PIN 2
CASE
0.030 (0.76)
0.020 (0.51)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC TO-247AD molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 10 in. - lbs. max.
Weight: 0.2 ounce, 5.6 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
SBL4030PT
SBL4040PT
Maximum repetitive peak reverse voltage
VRRM
30
40
Maximum working peak reverse voltage
VRMS
21
28
Maximum DC blocking voltage
VDC
30
40
Maximum average forward rectified current
at TC=100°C
I(AV)
40.0
Peak repetitive forward current per leg at TC=95°C
(rated VR square wave, 20 KHZ)
IFRM
40.0
Peak forward surge current, 8.3ms single half sine-
wave superimposed on rated load (JEDEC Method)
IFSM
400.0
Peak repetitive reverse surge current (NOTE1)
IRRM
2.0
Maximum instantaneous forward voltage
per leg at
IF=20A, TC=25°C
VF
(NOTE 2)
IF=20A, TC=100°C
0.58
0.50
Maximum instantaneous reverse current at TC=25°C
rated DC blocking voltage per leg (NOTE 2) TC=100°C
IR
10.0
100.0
Typical thermal resistance per leg (NOTE 3)
RΘJC
1.2
Voltage rate of change (rated VR)
dv/dt
1,000
Operating junction storage temperature range
TJTSTG
-40 to +125
UNITS
Volts
Volts
Volts
Amps
Amps
Amps
Amps
Volts
mA
°C/W
V/µs
°C
NOTES:
(1) 2.0µs pulse width, f=1.0 KHZ
(2) Pulse test: 300µs pulse width, 1% duty cycle
(3) Thermal resistance from junction to case per leg
4/98