SBL1630CT Datasheet, PDF (1/2 Pages) Diodes Incorporated – 16A SCHOTTKY BARRIER RECTIFIER

SBL1630CT AND SBL1640CT
SCHOTTKY RECTIFIER
Reverse Voltage - 30 and 40 Volts Forward Current - 16.0 Amperes
TO-220AB
0.160 (4.06)
0.140 (3.56)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1
23
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.35)
PIN 1
PIN 3
PIN 2
CASE
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Metal silicon junction, majority carrier conduction
♦ Low power loss, high efficiency
♦ High current capability,
low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Dual rectifier construction, positive center tap
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TC=95°C
Peak forward surge current, 8.3ms single
half sine-wave superimposed on rated load
(JEDEC Method)
Maximum instantaneous forward voltage
per leg at 8.0A (NOTE 1)
Maximum instantaneous reverse current at
rated DC blocking voltage per leg (NOTE 1)
TC=25°C
TC=100°C
Typical thermal resistance per leg (NOTE 2)
Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
SBL1630CT
30
21
30
SBL1640CT
40
28
40
16.0
IFSM
250.0
VF
IR
RΘJC
TJ, TSTG
0.55
0.5
50.0
2.0
-40 to +125
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
mA
°C/W
°C
NOTES:
(1) Pulse test: 300µs pulse width, 1% duty cycle
(2) Thermal resistance from junction to case per leg
4/98