RS1A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 1.0 Ampere)

RS1A THRU RS1K
SURFACE MOUNT FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 800 Volts Forward Current - 1.0 Ampere
DO-214AC
MODIFIED J-BEND
0.065 (1.65)
0.049 (1.25)
0.110 (2.79)
0.100 (2.54)
0.090 (2.29)
0.078 (1.98)
0.177 (4.50)
0.157 (3.99)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203) MAX.
0.208 (5.28)
0.194 (4.93)
Dimensions are in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ For surface mounted applications in order to optimize
board space
♦ Low profile package
♦ Built-in strain relief, ideal for
automated placement
♦ Fast switching for high efficiency
♦ Glass passivated chip junction
♦ High temperature soldering:
250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic over
passivated chip
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Weight: 0.002 ounce, 0.064 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Device marking code
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TL=90°C
Peak forward surge current
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method) TL=90°C
Maximum instantaneous forward voltage at 1.0A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
Maximum reverse recovery time
(NOTE 1)
Typical junction capacitance
(NOTE 2)
Maximum thermal resistance
(NOTE 3)
Operating junction and storage temperature range
SYMBOLS RS1A
RA
VRRM 50
VRMS 35
VDC 50
RS1B
RB
100
70
100
RS1D
RD
200
140
200
RS1G
RG
400
280
400
RS1J RS1K UNITS
RJ
RK
600 800 Volts
420 500 Volts
600 800 Volts
I(AV)
1.0
Amp
IFSM
VF
IR
trr
CJ
RΘJA
RΘJL
TJ, TSTG
30.0
Amps
1.30
5.0
50.0
150
10.0
105.0
32.0
-55 to +150
Volts
µA
250
ns
7.0 pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead mounted on
P.C.B. with 0.2 x 0.2” (5.0 x 5.0mm) copper pad areas
4/98