RGP20A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER

RGP20A THRU RGP20J
GLASS PASSIVATED JUNCTION FAST SWITCHING PLASTIC RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Amperes
*
TED
TEN
PA
Case Style GP20
1.0 (25.4)
MIN.
0.210 (5.3)
0.190 (4.8)
DIA.
0.375 (9.5)
0.285 (7.2)
0.042 (1.07)
0.037 (0.94)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
FEATURES
♦ Plastic package
has Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ 2.0 Ampere operation at TA=55°C with no thermal
runaway
♦ Typical IR less than 0.2µA
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Molded plastic over solid glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.03 ounce, 0.8 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
RGP
20A
RGP
20B
RGP
20D
RGP
20G
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
VRRM
50
100
200
400
VRMS
35
70
140
280
VDC
50
100
200
400
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 2.0A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
Maximum full load reverse current, full cycle
average, 0.375" (9.5mm) lead length at TA=55°C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
I(AV)
IFSM
VF
IR
IR(AV)
trr
CJ
RΘJA
TJ, TSTG
2.0
80.0
1.3
5.0
100.0
100.0
150.0
35.0
22.0
-65 to +175
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
RGP
20J
UNITS
600 Volts
420 Volts
600 Volts
Amps
Amps
Volts
µA
µA
250 ns
pF
°C/W
°C
4/98