P4KE530 Datasheet, PDF (1/2 Pages) General Semiconductor – TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR

ADVANCED INFORMATION
P4KE530 AND P4KE550
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Steady State Power - 1Watt Reverse Voltage - 530, 550 Volts
DO-204AL
0.107 (2.7)
0.080 (2.0)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
Dimensions are in inches and (millimeters)
Available in uni-directional only
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Protects TOPSwitch^®
♦ Glass Passivated Junction
♦ High temperature soldering guaranteed:
250°C/10 seconds at terminals
♦ Exellent Clamping capability
♦ Available in unidirectional only
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic body over
passivated junction
Terminals: Axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: The color band denotes the cathode, which is
positive with respect to the anode under normal TVS
operation
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Steady state power dissipation (NOTE 3)
Peak pulse power dissipation (NOTE 1,2, FIG.1)
Minimum breakdown voltage at 100µA
Maximum clamping voltage at 300mA, 10/1000 µs-waveform
Stand-off voltage
Maximum DC reverse leakage current at VWM
Typical temperature coefficient of V(BR)
Typical capacitance (NOTE 4)
at 0V
at 200V
Operating junction and storage temperature range
SYMBOLS
PM(AV)
PPPM
V(BR)
Vc
VWM
ID
CJ
TJ, TSTG
P4KE530 P4KE550
1.0
Minimum 300
530
550
660
477
495
5.0
650
75
45
-55 to +150
UNITS
Watts
Watts
Volts
Volts
Volts
µA
mV°C
pF
°C
NOTES:
(1) Non-repetitive current pulse, per Fig.3 and derated above 25°C per - Fig. 2
(2) Peak pulse power waveform is 10/100µS
(3) Lead temperature at 75°C=TL
(4) Measured at 1MHz
1/20/99